i have this problem: when customer downloads, it is very slow, with isp he bypassed the PA device and it was faster.
I created a new rule without any security profile to verify if it was caused by them, but customer says it is the same (and it could be slower).
QoS is not enabled.
Do you have any suggestion about this problem? Some function to check?
you could check if there's possibly any fragmentation or MTU issues, you may need to enable TCP MSS if that's the case
if you set up a packet-diag filter (debug dtaplane packet-diag set filter ...) and trace the global counters (show counter global filter packet-diag yes delta yes), you should be able to determine if packets are getting discarded or there are other issues (maybe packets are being received in an incorrect order, or fragmentation is being applied incorrectly,...)
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!