Evaluating- Secondary TCP/UDP connections

cancel
Showing results for 
Search instead for 
Did you mean: 

Evaluating- Secondary TCP/UDP connections

Not applicable

Having some trouble finding a way to enable the use of secondary tcp/udp connections for a rule.  For example, in our current FW I can configure a rule with a UDP primary connection with a range of ports using Receive/Send, then set it up for a UDP secondary connection with the same ports only with Send/Recieve.

How can I do this in PAN?

Thanks!

4 REPLIES 4

L3 Networker

I think this is what you want to do.

Create two rules.

1. Rule 1 - trust to untrust with service (UDP )

2. Rule 2 - untrust to trust with service (UDP )

<<Picture (Device Independent Bitmap)

So, this would require Two rules to accomplish this?  Bummer.

What is the application you are trying to allow through the firewall? In some cases, the response traffic will automatically be correlated to the request and allowed as needed.

Mike

It is not so much an application, as it is an HVAC system that is controlled via TCP/IP.  The system uses a pair of ports over UDP.  The primary UDP connection to it starts with send/receive and switches to receive/send as a secondary connection.  We are evaluating a unit for possible purchase so I am trying to find things our current FW is doing and seeing how to configure the PAN to do the same thing.

Current FW can, in a single rule, use both primary and secondary connections.

I have lots of other questions about the pan.  Would you be the one to which to bounce them off?

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!