firmware 4.0.1 SFP warning message

cancel
Showing results for 
Search instead for 
Did you mean: 

firmware 4.0.1 SFP warning message

Not applicable

Hello team.

on the firmware 3.X, when I put the unsupported SFP to PA, it show warning message..

but on the firmware 4.0.1, I don't see that warning message..

"Non-qualified SFP detected on port %d: vendor '%s'; part '%s'"

it means.. we're starting to support all SFP or no longer care about the SFP?

thank you

BH Lee

2 REPLIES 2

L5 Sessionator

The warning was removed in 4.0  and 3.1.8 as it sometimes erroneously appeared for supported SFPs.  The current list of supported SFPs can be found at this link:

https://live.paloaltonetworks.com/docs/DOC-1734

While other products may work well wilth the PAN, they are not supported, meaning a bug will not be opened if they do not work.

thank you very much

BH Lee

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!