Hi all ,
What is the workaround when you want to assign same IP pool but different access routes to groups or users on the same gateway ?
So let's say that on the gateway I have 2 or more groups like Group1 and Group2 but I have one IP pool to assign IPs when they are connected but in Group2 I want split tunnel and define specific access routes where Group1 I need to have full tunnel ?
I get this : dynamic ip pool overlapping
@GeorgiosFakis I haven't tested with 8.0, but in 8.1 and later you can use the "Client IP pool" tap at agent level, which applies to all groups.
Hows about splitting the scope into 2.
or increase mask to /23
default users 192.168.0.10-192.168.0.250
OK gotya... but..
I'm not quite sure of what your end result needs to be... does each of your 32 groups require a different split tunnel config.
or would one split tunnel suit all (or most).
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!