10-31-2013 03:51 AM
We had a hard time to create LAG between our Palo Alto 2050 and Extreme core switch Summit X650. We create an aggregate group and add four ports in Layer 3 and given the IP 192.168.X.1 and at the core side we made one port as master and add the four ports in that group with algorithm address-base LACP. In this scenario once we activate the LAG the port on the core is blocked and later today we had a doubt that this is because of different protocols. Which means in the core we did the LAG with LACP and I think PA doesn't support LACP which cause the issue. Does anybody comes across the same scenario and if you have any idea how to do this that would be great.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!