I wanted to fine tune a bit the default (Alert=10000,
Activate=10000 and Max=40000) values on our Zone protection profile in order to
limit the number of syn flood attack that seem to me very high, but for do it I
need to monitor during some time our current new session p/s, and after day of
searching I couldn’t find any CLI commands or GUI option to do it.
Is there someone or may be Palo support can help me on
Typically we had an attack two weeks ago and our FW mgmt. CPU
was at 100% after opening a support ticket for that, the only think that
support give us as advice was to reduce the logging generation… but I found out
by myself that first we didn’t have any Zone protection for this destination Zone
and after enabling this zone protection profile I see that the values are very
So thanks for your help on that
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!