Yes. Multiple VR with multiple VSYS is the way to go.
I was able successfully commit the following configuration:
And was NOT able to commit this configuration:
So, if you configure different VSYS with different VR, you should be able to configure different interfaces with overlapping subnets.
Hope that helps!
Thanks for your reply! Your answer is helpful but I meant other thing. Let say I have a few Virtual Systems that represent separate clients and each of the users has a common interface for external communications. This is solved by Shared Gateway and single Virtual Router is used to route the traffic for all of the Virtual Systems through the Shared Gateway. What if the users use overlapping addresses. Can we also use separate VR for each VSYS in this case?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!