How to view SFP installed on a Panorama or Logcollector

Showing results for 
Search instead for 
Did you mean: 

How to view SFP installed on a Panorama or Logcollector

L2 Linker

Does anyone know how to view the sfp installed on an m500/600 panorama or log collector?


I have tried the below command and even put a wildcard on it but it only gives me hard drive info.


> show system state filter sys.sX.pY.phy



Cyber Elite
Cyber Elite

thank you for the transceiver list but the question is "How to view SFP installed on a Panorama or Logcollector ?"

Maybe try a match instead of a filter? That might get you the info also.

show system state | match phy

tried that and got nothing. I think the way they monitor interfaces on this chassis is different than the firewalls.

might be need to see if someone replies here.


i tried on panorama 


show system state filter sys.s1.p*.phy

'sys.s1.p*.phy': NO_MATCHES


running the command noted will not produce the interfaces on the panorama or log collector, this is why you show a NO_MATCHES. Hopefully someone from PA will chime in with some knowledge on the topic.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!