12-16-2010 05:52 AM
We use HP 3500yl switches as our routing for internal data. They have a default router pointing to 10.1.1.2/24 (PA-500). The HPs work by putting the interface in a Vlan then putting it as untagged and applying the ip to the vlan-interface.
so:
HPswitch(10.1.1.1/24) in vlan 101 ---> connect ---> PA500 E1/2 (10.1.1.2/24)
I am unable to ping 10.1.1.2. Both sides say they are up/up/1000FD.
Any ideas or suggestions to try?
12-16-2010 06:10 AM
Have you configured the PA-500's ethernet interface to allow ping? This is done via a Management Profile (Network Tab -> Network Profiles -> Interface Mgmt). Once you have created a profile that will allow ping you need to apply it to the interface (Network Tab -> Interfaces -> ethernet 1/2)
that should allow you to ping the interface.
12-16-2010 06:10 AM
Have you configured the PA-500's ethernet interface to allow ping? This is done via a Management Profile (Network Tab -> Network Profiles -> Interface Mgmt). Once you have created a profile that will allow ping you need to apply it to the interface (Network Tab -> Interfaces -> ethernet 1/2)
that should allow you to ping the interface.
12-16-2010 06:35 AM
yeah shortly after posting I found the L3 setup video and saw what I was doing wrong. GAH. I hate how you have to make a fool of yourself in order to find the problem. Thanks for the help!
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
