IP does not show properly in ACC.

cancel
Showing results for 
Search instead for 
Did you mean: 

IP does not show properly in ACC.

L0 Member
IP does not show properly in ACC.
How can I solve this?
 
화면 캡처 2021-09-03 104305.jpg

 

 
 
 
 
 
8 REPLIES 8

L1 Bithead

You looking into IPV6 not IPv4. fix the filter unless you are using IPv6.

Murad S Elmgbar

Cyber Elite
Cyber Elite

Hi @MyungGyo ,

Can you provide more information describing the problem you are experiencing?

Which IP do you think is not shown properly?

What version are you running?

The ip address is shown as ipv6. Occasionally, it appears as ipv4, but most of the time it appears as ipv6.
OS version is 10.1.0.

 

L1 Bithead

You could have NAT64 in your network. if not just disable IPv6.

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClMLCA0

 

Murad S Elmgbar

thanks alot it worked after diasabel it 

L0 Member

I had the same issue with IPv6 completely disabled.

upgraded to 10.1.3 and it seems fixed, at least for the moment.

i could confirm the behaviour working for round about 6 hours, afterwards i again got only ipv6 addresses - IPv6 disabled on all interfaces. could you provide feedback if you've experienced the same behaviour? 

indeed, back to weird looking addresses (+ half broken ACC which sometimes just displays nothing, which is a new thing)

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!