11-25-2011 12:31 AM
Anybody ran into such issue with a PA device ?
"Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,2)"
Then device goes into loop boots... No way to make it boot, even using the maintenance partition.
Is there a way to use the front USB port to rescue ?
Any idea ?
07-29-2020 01:53 PM
Having the same issue with a 5260 on our network.
Except ours just stops at "Power Down System"
Pull the power cable try and restart get into the alternate images.
Get into maintenance menu and while in the menu the FW starts shutting down.
07-29-2020 09:38 PM
As per below posts looks like hard drive.
Follow the steps and if still does not work need RMA for Hard Disk
Please see this below
07-30-2020 02:45 PM
As previously mentioned, open a support case. They will grab the info they need and get you a new part. Also backup your config now! even if using Panorama, its a good thing to have.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!