Virtual Wire Configuration
Each virtual wire interface (ethernet 1/1 and ethernet 1/2) must be connected to a security zone and a virtual wire. To configure these settings, select the Config tab and complete the following tasks:
In the Virtual wire drop-down click New Virtual Wire, define a Name and assign the two data interfaces (ethernet 1/1 and ethernet 1/2) to it, and then click OK.When configuring ethernet 1/2, select this virtual wire. Select New Zone from the Security Zone drop-down, define a Name for new zone, for example client, and then click OK.
Layer 2 Configuration
For each Layer 2 interface, you require a security zone. Select the Config tab and complete the following tasks:
Select New Zone from the Security Zone drop-down, define a Name for new zone, for example client, and then click OK.
Repeat steps 2 and 3 above for the other interface.
Click Commit to save changes to the firewall.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!