With PA-200 there is a command similar to:
set system setting fan-mode auto
in order to throttle the onboard fan(s) so it doesnt rev up to max rpm and stays there as it normally might do.
But this command doesnt seem to exist for the PA-500 series or am I missing somthing here?
All I could find is (output from: show system environmental):
Slot Description Alarm RPMs Min RPM
S0 Fan #1 Operational False True 1
S0 Fan #2 Operational False True 1
Doesnt seem to even detect a RPM, the sound can confirm the fans are operating...
> The only vitals that you can check for is the LED front panel of the appliance :
Green All fans are operating normally.
Red One or more fans have failed.
Red There is a hardware failure, which may include power supply
detected but not working, fan failure, HA failover, or temperature
above high temperature threshold.
Off The device is operating normally
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!