We have user identification working nicely using user ID agents on a few of our active directory domain members.
I've been looking at MS Direct Access (and formerly UAG) and it seems that a DA implementation would show all connected users as having the same source IP address and therefore user ID. (The private IP address of the DA server.)
Do PA firewalls have a way of identifying which user the traffic inside the DA 'tunnel' is from?
I guess what I'm probably asking for is a 'DA Server User Agent' in the same way that there is a MS Terminal Server Agent which does a similar job.
I'm thinking that you might try to monitor it before it gets to the DA server. There should be a way to map the user public IP address to their user-id, e.g. if there are logs somewhere in either: DA server, AD, some other security tool, or similar, you could push that into user-id. Not simple or elegant though. I wouldn't try to monitor the traffic within the tunnel directly, but anything traversing your firewall going to the IP address of the DA server.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!