08-05-2022 10:30 PM - edited 08-05-2022 10:31 PM
We have PA-5260 in HA pair in our environment. Recently we had configured SNMPv2 traps on Palo Alto firewall to forward traps to our SNMP server and configured Log forwarding to forward All system logs as traps to the SNMP server.
Specifically we need to forward power supply related traps forwarding. Yesterday we had removed on of the power supply cable and checked show system environmental and could see alarm as true and power supply inserted as false for power supply #1.
On system logs we had got the following logs generated:
|05-08-2022 18:06||SYSTEM||general||general||general||critical||Chassis Master Alarm: Cleared|
|05-08-2022 18:05||SYSTEM||general||general||general||critical||Chassis Master Alarm: Power Supply|
|05-08-2022 18:05||SYSTEM||hw||ps-failure||general||critical||Alarm on Power Supply #1 (left)|
When the Power supply had been removed we had got the ps-supply failure and Chassis master alarm and we also had got traps with OID 126.96.36.199.4.1.254188.8.131.52.2.0.913 as mentioned in the below document.
Once we re-plugged in the Power supply #1 we have got only "Chassis Master Alarm: Cleared" log created on the firewall. We haven't received the traps for OID's .184.108.40.206.4.1.254220.127.116.11.2.0.911 and .18.104.22.168.4.1.25422.214.171.124.2.0.912
|.126.96.36.199.4.1.254188.8.131.52.2.0.911||Power Supply inserted|
|.184.108.40.206.4.1.254220.127.116.11.2.0.912||Power Supply removed|
|.18.104.22.168.4.1.25422.214.171.124.2.0.913||Power Supply failure|
Upon checking the system logs we could see that no Power Supply inserted and Power Supply removed logs were generated on the firewall.
How to send traps .126.96.36.199.4.1.254188.8.131.52.2.0.911 and .184.108.40.206.4.1.254220.127.116.11.2.0.912 to SNMP server if the Power supply is removed and plugged in again.
Thanks in Advance.
08-15-2022 08:59 AM
You are best to communicate your Feature Request to your local PANW SE.
That is the correct process as we have understood it.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!