08-01-2012 05:58 PM
I'm looking for an OID to use for monitoring the CPU/MEMORY utilization with my NMS system. My MIB walk didn't turn up anything useful.
06-14-2017 12:22 PM
What exactly does not work?
SNMP community set correctly?
Firewalls between the one you want to monitor and your monitoring server allows snmp traffic?
06-21-2017 05:43 AM
When I test with OID for 5050 devices below are the results:
Data plane -0- 188.8.131.52.184.108.40.206.220.127.116.11
When I test with OID :
Data plane -1- 18.104.22.168.22.214.171.124.126.96.36.199
I am getting below error:
So I suspsect the OID"
Data plane -1- 188.8.131.52.184.108.40.206.220.127.116.11" is not working
For 5050 like 2 data planes , are there 2 OIDs require or with single OID will it show average value of all cores in 2 data planes?
06-21-2017 08:59 AM
There is only 1 average value for all cores/dataplane-processors.
--> 1 OID for MP CPU and 1 for DP CPU(s)
06-23-2017 01:29 AM - edited 06-23-2017 06:06 AM
@vsys_remoSo which means for data plane this OID only valid: Data plane -0- 18.104.22.168.22.214.171.124.126.96.36.199 ?
I have seen some reference for tfor Data plane -1- 188.8.131.52.184.108.40.206.220.127.116.11
Was it removed or is there any reference to say only one OID for devices like 5050 where mutiple data planes are used
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!