OSPF Redistribution on second area

Showing results for 
Show  only  | Search instead for 
Did you mean: 

OSPF Redistribution on second area

L4 Transporter

I seem to be having an issue with OSPF redistribution to BGP.  I've got two areas, the primary (area 1) that spans most of the network, and a new smaller area (area 2) that I've set up to separate out routes for a smaller connected network.  Both of these areas are present on a Virtual Router on the Palo Alto.


Area 1 is already set up and is properly redistributing to BGP using a Redistribution Rule.


Area 2 has a few routes coming in as O1 and doesn't seem to be redistributing to iBGP.  I created a Redistribution Rule for it (setting the type to ospf and ext-1 with area 2) and the rule is set to redistribute.  I also added it as a redistribution rule under BGP.


I can see the routes on the router under OSPF but they don't seem to be making it over to BGP.


Any suggestions?



  • 0 replies
  • 101 Subscriptions
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!