PA HA with Topology Design

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

PA HA with Topology Design

L0 Member

Hello Community,

I have two sites, I did an initial design, and I want to make sure that I won't find any problems in real installation*

on site 1 (topology1) We found a problem that the distance between ISP installation and IT room more than 200m  So we wanted to use a media converter copper to fiber , Is this correct or could it cause a problem like loop?

on site 2 (topology2) The distance is close so every port from the router version Fios  To two FWs PA-440

Are both designs correct? Or does need a switch  Any suggestions or help please?

Thank you

Mohammed
1 REPLY 1

L0 Member

Design.jpeg

Mohammed
  • 1532 Views
  • 1 replies
  • 0 Likes
  • 101 Subscriptions
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!