PA UID LAB not working correctly

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

PA UID LAB not working correctly

L1 Bithead

Hi Everyone,

 

I am currently having issues trying to get UID to work on Eve-NG using PANOS 9.0.4, it is a only a EVAL license but everything is working except for UID.

I have followed agentless guide to setup and AD server is connected to the PA as per the "User Mapping" tab.

Policy is setup correctly, however as soon as I add "Domain Users" as the Source to the policy and commit, the host loses connectivity to the internet..

- Now, if I was to leave the Users blank then the host is able to get the internet.

 

Currently, seeing the below error, but been unable to find any resolution.

2021-03-27 21:41:10.163 +0000 Warning: pan_user_group_user_prime_uid_lookup(pan_user_group_multi_attr.c:1279): For palo\pauser user, domain palo does not exist in group-mapping
2021-03-27 21:41:13.157 +0000 Warning: pan_user_group_user_prime_uid_lookup(pan_user_group_multi_attr.c:1279): For palo\pauser user, domain palo does not exist in group-mapping
2021-03-27 21:41:16.149 +0000 Warning: pan_user_group_user_prime_uid_lookup(pan_user_group_multi_attr.c:1279): For palo\pauser user, domain palo does not exist in group-mapping

 

 

domain palo does not exist in group-mapping - It is mapped correctly (so, i think) and I am able to pull the directory directly from AD.

======

 

This is the Group Mapping: 

Group Mapping(vsys1, type: active-directory): GroupPro
Bind DN : pauser@palo.local
Base : DC=palo, DC=local
Group Filter: (None)
User Filter: (None)
Servers : configured 1 servers
ADserver2016.palo.local(389)
Last Action Time: 1020 secs ago(took 0 secs)
Next Action Time: In 2580 secs
Number of Groups: 2
cn=paloalto,ou=firewall,dc=palo,dc=local
cn=domain users,cn=users,dc=palo,dc=local

 

Please let me know if you need more information.

 

Thank you in advance.

1 accepted solution

Accepted Solutions

in your user identification settings, check if you have probing enabled. probing wil periodically send out a WMI probe to see if a user is still logged on, if the WMI user doesnt have enough privileges or the laptop firewall blocks the probe (or per the use case, the user is logged off or the laptop is shut down), the user will be unregistered from the user-ip mapping

 

also check your 'cache' as the default is 45 minutes which is too short in most cases (go for 9 hours which corresponds to the average kerberos ticket/time spent at work)

 

check to see if your mapped user corresponds to the  group members:

show user group list

show user group name cn=paloalto,ou=firewall,dc=palo,dc=local

 

 

did you enable user-id in the dmz and trust zones (network > zones > enable user identification)

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

View solution in original post

4 REPLIES 4

Cyber Elite
Cyber Elite

how did you set the 'domain' in the group mapping object (Device > user identification > group mapping settings)?

 

it needs to be the netbios domain (so 'palo' in your case), or empty. anything else will make it fail

 

are you seeing the user in "show user ip-user-mapping all"  ?

 

 

 

in your security rule, are you setting "Domain Users" or is it "known-user" ? ("Domain Users" does not exist as a default value so it must be an object you created)

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

Many thanks for replying,

 

Under "Group Mapping", I have set it "palo" instead of "palo.local"

 

Vimz888_7-1616967655136.png

 

Vimz888_4-1616967182408.png

 

Within AD, I have a OU called "Firewall"

- Within the Firewall OU > I have a Security Group called "paloalto" 

Vimz888_3-1616967134257.png

- I have two test account Members within "paloalto"

- dmzuser

- trustuser

Vimz888_1-1616967014111.png

 

- The "paloalto" is attached to the Source User within the Policy.

- Now, I am using 1 of those test account (dmzuser) to test the connectivity (from Winz7) but cannot access the internet.

Vimz888_0-1616966951111.png

 

Here is what I am finding, I keep on seeing "Unknown"

admin@PA-VM> show user ip-user-mapping all

IP Vsys From User IdleTimeout(s) MaxTimeout(s)
--------------------------------------------- ------------------- ------- -------------------------------- -------------- -------------
192.168.40.3 vsys1 AD palo\dmzuser 770 770 <<<<<<<< even though its listed I am unable to reach the internet.
192.168.20.1 vsys1 AD palo\pauser 2655 2655
192.168.20.3 vsys1 Unknown unknown 1 4
Total: 3 users

 

=======================

The host would just disappear:- 192.168.40.3 is the host where i am testing the connectivity from

 

admin@PA-VM> show user ip-user-mapping all

IP Vsys From User IdleTimeout(s) MaxTimeout(s)
--------------------------------------------- ------------------- ------- -------------------------------- -------------- -------------
192.168.20.1 vsys1 AD palo\pauser 2688 2688
Total: 1 users

 

There is no connectivity issue between the hosts/PA and AD

Vimz888_5-1616967424168.png

When i do Tracerotue from the test machine (192.168.40.3), I just get Request Timed Out...

- this is only when I have OU "paloalto" attached as Source. 

 

Thank you

in your user identification settings, check if you have probing enabled. probing wil periodically send out a WMI probe to see if a user is still logged on, if the WMI user doesnt have enough privileges or the laptop firewall blocks the probe (or per the use case, the user is logged off or the laptop is shut down), the user will be unregistered from the user-ip mapping

 

also check your 'cache' as the default is 45 minutes which is too short in most cases (go for 9 hours which corresponds to the average kerberos ticket/time spent at work)

 

check to see if your mapped user corresponds to the  group members:

show user group list

show user group name cn=paloalto,ou=firewall,dc=palo,dc=local

 

 

did you enable user-id in the dmz and trust zones (network > zones > enable user identification)

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

Probing is enabled, Interval is set as default of 20min.

 

"also check your 'cache' as the default is 45 minutes which is too short in most cases (go for 9 hours which corresponds to the average kerberos ticket/time spent at work)"

I increased "Cache" User ID Timeout to 540min, Commited…

Soon after committing, I got CONNECTIVITY....

 

Vimz888_8-1617025808170.png

 

traffic is being allowed.

Vimz888_11-1617026325814.png

 

Thank you very much for your help and guidance.

  • 1 accepted solution
  • 3748 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!