Sorry guys, just mistyped. So, in my previous post I tried to ping www.google.com. Now I'm trying to ping 192.168.0.1 and I get reponse. But why I can't ping the rest of the world and why I can't ping my router without specifying source address?
Your issue is that as you mentioned your management interface is host only.
>> Network adapter 1 - Vmnet2 (Host-only) for Managament interface
All requests that go out from Palo by default use management interface.
And as this interface is connected to host-only network DNS requests never get out.
You should either configure management interface into NAT network or even better under
Device > Setup > Services > Service Route Configuration
Choose option "customize" and change DNS requests to go out from external interface.
+ 1 Raido.
l would use this configuration:
On VMware workstation:
network adapter = BRIDGED. This is actually your management interface and you don't see it in the network TAB of the device
network adapter 2 = VMnet(X) This is actually your first interface = ethernet1/1
network adapter 3 = VMnet(X) This is actually your first interface = ethernet1/2
network adapter 4 = VMnet(X) This is actually your first interface = ethernet1/3
Worked for me 100 times. Need assistance, let me know. Can do a quick remote session.
Finally, I have my PA work as intended. So, I did exactly as you adviced. Now I have:
Vmnet Bridged 192.168.0.10 - for MGMT
Vmnet Bridged 192.168.0.254 - for Intenet Interface
Vmnet LAN - 172.16.1.1 - for LAN interface
Vmnet DMZ - 172.16.2.1 - for DMZ interface
Thank you very much for your help.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!