- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
08-30-2016 03:07 PM
hi
i`m trying to troubleshoot some vpn tunneling connection drops
so i logged to the CLI execute some commands to troubleshoot the VPNs
test vpn ike-sa gateway
show vpn ike-sa gateway
test vpn ipsec-sa tunnel
none of this command exist even in configure mode
PAN-200
PAN-OS-7.1
any ideas?
Thanks
08-30-2016 04:38 PM - edited 08-30-2016 04:39 PM
You are not typing complete command. Use ? or pres tab twice to get avail options.
test vpn ike-sa gateway <name>
show vpn ike-sa gateway <name>
test vpn ipsec-sa tunnel <name>
08-30-2016 05:47 PM
hi
as you can see in the screenshoot
i did type "?" and used tab compilation
still dont have any commands as test, find, show etc
only configure
tnx
08-31-2016 02:09 AM
I've seen the same issue on some cases after the PA-200 upgraded to PAN-OS 7.1.1.
In those cases the device was also experiencing other issues.
Are you still able to log into the web-GUI ? Is the device still passing traffic normally ?
Eitherway I recommend that you open a case with support to identify the root cause.
Regards,
-Kim.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!