I am configuring 2 PA 2020's for a customer and am having the following problems w/the HA pair once built. Has anyone came across this issue?
***** Text below was sent to my internal technical team *****
I have HA setup, configured and the failover active/passive tested okay w/no issues. However the synching of the running config is having issues. The below output is from the Active box when I manually push the running config the other box.
Is the technician syncing from the UI first and is that also failing with the same output? Just confirming that the following command is being executed on the Active device if syncing from UI is not working:
pantac@PA-4050> request high-availability sync-to-remote running-config
Yes, I have tried running the command from the Active firewall and it failed. I just did a maintenance mode recovery and now the 2 boxes are in Sync. Let's see if it stays in sync over the course of this day as I am still in the process of building out their configuration.
Thanks for your resonse,
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!