pan-os 8.0 ntp not sync

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

pan-os 8.0 ntp not sync

L1 Bithead

Hi,

 

I have a problem with test VM-300, NTP not sync and use local clock.

But if i try to set timezone - clock set not correct

 

 

>show ntp

NTP state:
NTP not synched, using local clock
NTP server: 178.124.164.107
status: rejected
reachable: yes
authentication-type: none

 

ping source 192.168.18.227 host 178.124.164.107
PING 178.124.164.107 (178.124.164.107) from 192.168.18.227 : 56(84) bytes of data.
64 bytes from 178.124.164.107: icmp_seq=1 ttl=55 time=2.63 ms
64 bytes from 178.124.164.107: icmp_seq=2 ttl=55 time=2.51 ms
^C

 

> show system info


ip-address: 192.168.18.227
netmask: 255.255.255.0
default-gateway: 192.168.18.254
ip-assignment: static
ipv6-address: unknown
ipv6-link-local-address: fe80::250:56ff:feb0:6848/64
ipv6-default-gateway:
mac-address: 00:50:56:b0:68:48
time: Wed Feb 7 13:23:05 2018   (real time 10:18)
uptime: 0 days, 15:38:55
family: vm
model: PA-VM
vm-license: VM-300
vm-mode: VMWare ESXi
sw-version: 8.0.7

 

 

1 accepted solution

Accepted Solutions

Community Team Member

Hi @SSergey,

 

Can you check under VMware Tools, if "Synchronize guest time with host" is enabled ?

If so, can you please disable the option as a test ?

 

If all fails, I'd go with capturing the NTP traffic (How-To-Packet-Capture-tcpdump-On-Management-Interface) or check the logs (sysdagent.log) for more information and reach out to TAC.

 

Cheers,

-Kiwi.

LIVEcommunity team member, CISSP
Cheers,
Kiwi
Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.

View solution in original post

4 REPLIES 4

Community Team Member

Hi @SSergey,

 

Can you check under VMware Tools, if "Synchronize guest time with host" is enabled ?

If so, can you please disable the option as a test ?

 

If all fails, I'd go with capturing the NTP traffic (How-To-Packet-Capture-tcpdump-On-Management-Interface) or check the logs (sysdagent.log) for more information and reach out to TAC.

 

Cheers,

-Kiwi.

LIVEcommunity team member, CISSP
Cheers,
Kiwi
Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.

 

Ok, i try to disable this otions.

vm tools sync guest.JPG

@kiwi,

 

I'm disable this option, now time is correct.

 

ntp  state  sync 

> show ntp

NTP state:
NTP synched to 178.124.164.107
NTP server: 178.124.164.107
status: synched
reachable: yes
authentication-type: none

 

> show clock

Wed Feb 7 13:22:38 MSK 2018

> show clock more

dataplane time: Wed Feb 07 13:22:41 MSK 2018

 

Thanks for help

Community Team Member

Great and thanks for the update !

 

Cheers !

-Kiwi.

LIVEcommunity team member, CISSP
Cheers,
Kiwi
Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.
  • 1 accepted solution
  • 7920 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!