I have two separate large customers who are both experiencing the same issue. They both have M-600 Panorama appliances in dedicated management mode with HA peers and dedicated log collectors.
After upgrading to PAN-OS 9.0.x (currently on 9.0.4) - the GUI is slow and refreshes after each change. For example, if you add a TAG to a rule, the section will refresh before you can click on another. If you drag and drop a tag between rules, the maximum you are going to get is two before it refreshes. If I'm performing multiple changes to a policy, after a few rules in it will start jumping back to the top of the policy after every refresh. It's very annoying and leaving a bad impression of the GUI with the customers.
Is this a known issue? Is there a fix to this issue? I'm struggling to find any answers through searching Live and other tech blogs.
Is this happening in all browsers ?
I've noticed similar issues, but not as bad as you seem to have it (plus mine are VM on a slightly taxed system so i assumed that was the issue)
have you been in touch with TAC?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!