03-09-2021 04:32 PM - edited 03-09-2021 04:35 PM
We use Panorama to centrally managing around 50+ firewalls, usually choose image upload function in Panorama to offload internet traffic. I found the Panorama cannot upload to "Passive" unit since PanOS 9.1 and showing "Download error: HTTP response code said error", except passive units, all "Active" unit, content updates & wildfire are upload & deploy successfully without this error, could anyone help?
03-16-2021 03:18 PM
do you have service routes set ? those won't be available in passive devices as the dataplane interfaces are down
03-17-2021 08:56 AM
it is using management interface.
04-09-2022 09:15 AM
Did you work out why it was doing this? I am seeing a similar issue. It sometimes works sometimes gives the same error. If I retry it a few times, sooner or later it just works. the fact that no settings are changing is annoying, and the error message is useless.
09-16-2022 12:43 AM
Has anyone found a fix for this? We also have this problem where 50% of the attempts fail and need to repeat many many times until all are completed. This is taking many hours to complete so really could do with resolving.
09-19-2022 01:44 AM
i've seen this with one of my customers last week where a couple firewalls had this issue while jumping from 8.1 to 9.0
after downloading the image locally and installing, the issue went away for all devices after the first upgrade for consequent uploads from panorama
not the best fix but it did work 😉
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!