PBF with Egress loopback interface

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

PBF with Egress loopback interface

L0 Member

I may be going about this wrong, but here's what I'm trying to accomplish, and this is the way I thought I could accomplish it.

 

I need to route all traffic from a specific zone/subnet to a routing instance, and load balance egress, with the exception of RFC1918 destinations.  My thought was to create a PBF rule to forward traffic to a loopback interface in the desired routing instance, where I have the appropriate routes configured, along with ECMP for load balancing.  This obviously doesn't work or I wouldn't be posting here.  The image below is a representation of what I am trying to do.

 

Screen Shot 2022-03-16 at 11.38.38 AM.png

1 REPLY 1

L0 Member

I've updated the config to use a different logical L3 interface (ae.200) due to loopback interfaces not being support for PBF, but I'm still not seeing any traffic flow.

  • 1745 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!