I'm having trouble with using a static ip adresses while connecting using PPPoE.
Using none on IP adress works.
Logs says "'PPPoE session failed to connect for user:firstname.lastname@example.org on interface:ethernet1/1. Reason: No network protocols running, LCP down'"
Is passive enabled ? (When passive is enabled then that means that the firewall will not try to initiate the LCP negotiations and would rely on remote side peer to initiate the session).
Enabling the pppoe debugs to get more details :
admin@PA-VM> debug pppoed global on debug sw.pppoed.runtime.debug.level: debug admin@PA-VM> debug pppoed pcap on
There's a pppoed.log file you can tail while you test the access :
admin@PA-VM> tail follow yes mp-log pppoed.log
Thanks for the reply.
That gave a lot more and the logs gave this:
017-10-06 17:49:06.573 +0800 debug: log_write(ppp/utils.c:678): [0xffe40384f0/16] PPP RCVD: [IPCP ConfAck id=0x7 <ms-dns1 22.214.171.124> <ms-dns3 126.96.36.199>]
2017-10-06 17:49:06.573 +0800 debug: log_write(ppp/utils.c:678): ipcp: up
2017-10-06 17:49:06.573 +0800 debug: log_write(ppp/utils.c:678): Peer refused to agree to our IP address
2017-10-06 17:49:06.573 +0800 debug: log_write(ppp/utils.c:678): ipcp: down
2017-10-06 17:49:06.574 +0800 debug: log_write(ppp/utils.c:678): [0xffe40384f0/16] PPP SENT: [IPCP TermReq id=0x8 "Refused our IP address"]
So checking with BT once more that the info I got is correct.
Just a quick question more.
The ip adress entered in the address field in the PPPoE settings. Is that the IP with or without subnetmask?
According to Technical Details Regarding PPPoE Support :
Static IP Address settings
That said, when you configure an address of type 'IP Netmask' the description says that you can enter an IP address or a slash notation.
I must say I'm not 100% sure if both notations will be accepted ^_^
Personally I'd go with just the IP address but maybe someone here can correct me if I'm wrong.
Still got a problem.
And still getting: Peer refused to agree to our IP address
BT confirms that IP adress I'm trying to set is correct.
and no reply why it works with no adress set.
Any idea getting around this problem using a subinterface (I know that i won't accept a subinterface on a PPPoE interface) or any other ide?
I would suspect you need to speak to BT as it looks like their end causing the issue.
If you leave the IP address as 'none' do the devices connect? If they do check then runtime info and see if you've been provisioned your 'static' IP.
hope this helps,
Yes, When using none as adress I'm getting a completly different adress then the one I got from BT.
Reported this to BT and awaiting answer.
Thanks for the response
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!