Putty cursor is stuck there after PA-VM starts

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Putty cursor is stuck there after PA-VM starts

L2 Linker

Hi, Palo-alto PA-VM-KVM-9.1.0.qcow2 is installed into GNS3 version 2.1.21 based on the below link. I try every configuration is same as the link. Two vCPU, 4G RAM and 8 interface. but after it start, it shows below message and then stop at the end of the below message.  Anyone can give some suggestion? Thank you

 

https://www.gns3network.com/how-to-deploy-palo-alto-vm-firewall-in-gns3/

 

Please see attached error message

Spoiler

Enter 'maint' for boot menu.
Booting PANOS (sysroot0) after 5 seconds...

Entry:
Booting 'PANOS (sysroot0)'

root (hd0,1)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz ro root=/dev/sda2 init=/sbin/init_single_core console=ttyS
0,9600n8 console=tty0 alternate_root=/dev/vda2 alternate_root=/dev/xvda2 hugepa
ges=0 alternate_root=/dev/nvme0n1p2
[Linux-bzImage, setup=0x4200, size=0x7c0940]

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.0-957.21.3.10.pan.x86_64 (build@e31eaa9bc79a) (gcc version 7.3.1 20180303 (Red Hat 7.3.1-5) (GCC) ) #1 SMP Fri Nov 8 08:27:26 PST 2019
[ 0.000000] Command line: ro root=/dev/sda2 init=/sbin/init_single_core conso le=ttyS0,9600n8 console=tty0 alternate_root=/dev/vda2 alternate_root=/dev/xvda2 hugepages=0 alternate_root=/dev/nvme0n1p2
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffdffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000139ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33 fbe13 by qemu-project.org 04/01/2014
[ 0.000000] e820: last_pfn = 0x13a000 max_arch_pfn = 0x400000000
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WP UC- UC
[ 0.000000] e820: last_pfn = 0xbffe0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f6470-0x000f647f] mapped at [ffff ffffff200470]
[ 0.000000] Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 00000000000f6220 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 00000000bffe1737 00034 (v01 BOCHS BXPCRSDT 00000001 B XPC 00000001)
[ 0.000000] ACPI: FACP 00000000bffe0c14 00074 (v01 BOCHS BXPCFACP 00000001 B XPC 00000001)
[ 0.000000] ACPI: DSDT 00000000bffe0040 00BD4 (v01 BOCHS BXPCDSDT 00000001 B XPC 00000001)
[ 0.000000] ACPI: FACS 00000000bffe0000 00040
[ 0.000000] ACPI: SSDT 00000000bffe0c88 009F7 (v01 BOCHS BXPCSSDT 00000001 B XPC 00000001)
[ 0.000000] ACPI: APIC 00000000bffe167f 00080 (v01 BOCHS BXPCAPIC 00000001 B XPC 00000001)
[ 0.000000] ACPI: HPET 00000000bffe16ff 00038 (v01 BOCHS BXPCHPET 00000001 B XPC 00000001)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000139ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x139fd6000-0x139ffcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x139ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbffdffff]
[ 0.000000] node 0: [mem 0x100000000-0x139ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x139ffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbffe0000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfffbffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfffbffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:5120 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node _ids:1
[ 0.000000] PERCPU: Embedded 37 pages/cpu @ffff976fb9c00000 s113240 r8192 d30 120 u1048576
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pag es: 1007849
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: ro root=/dev/sda2 init=/sbin/init_single_cor e console=ttyS0,9600n8 console=tty0 alternate_root=/dev/vda2 alternate_root=/dev /xvda2 hugepages=0 alternate_root=/dev/nvme0n1p2
[ 0.000000] Don't allocate hugepages as total memory 4095480K is less than 4G B, total ram pages 1023870
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 3942000k/5144576k available (9780k kernel code, 1049096k absent, 153480k reserved, 6068k data, 1996k init)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:327936 nr_irqs:440 0
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 25165824 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memor y cgroups
[ 0.000000] tsc: Unable to calibrate against PIT
[ 0.000000] tsc: using HPET reference calibration
[ 0.000000] tsc: Detected 2591.941 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.009662] Calibrating delay loop (skipped), value calculated using timer fr equency.. 5183.88 BogoMIPS (lpj=2591941)
[ 0.010687] pid_max: default: 32768 minimum: 301
[ 0.011634] Security Framework initialized
[ 0.013640] SELinux: Initializing.
[ 0.014000] Yama: becoming mindful.
[ 0.019652] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes )
[ 0.025168] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.027000] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.027161] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.035245] Initializing cgroup subsys memory
[ 0.036000] Initializing cgroup subsys devices
[ 0.037196] Initializing cgroup subsys freezer
[ 0.038000] Initializing cgroup subsys net_cls
[ 0.038000] Initializing cgroup subsys blkio
[ 0.038132] Initializing cgroup subsys perf_event
[ 0.038538] Initializing cgroup subsys hugetlb
[ 0.039000] Initializing cgroup subsys pids
[ 0.039149] Initializing cgroup subsys net_prio
[ 0.041481] mce: CPU supports 10 MCE banks
[ 0.042444] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.043000] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.043000] tlb_flushall_shift: -1
[ 0.043521] Speculative Store Bypass: Vulnerable
[ 0.044000] FEATURE SPEC_CTRL Not Present
[ 0.044058] FEATURE IBPB_SUPPORT Not Present
[ 0.050000] Spectre V2 : Vulnerable: Retpoline without IBPB
[ 0.052000] Freeing SMP alternatives: 36k freed
[ 0.062000] ACPI: Core revision 20130517
[ 0.076891] ACPI: All ACPI Tables successfully acquired
[ 0.077859] ftrace: allocating 34332 entries in 135 pages
[ 0.146000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.152000] smpboot: CPU0: AMD QEMU Virtual CPU version 2.4.0 (fam: 06, model : 06, stepping: 03)
[ 0.153000] APIC calibration not consistent with PM-Timer: 187ms instead of 1 00ms
[ 0.153000] APIC delta adjusted to PM-Timer: 6249990 (11746831)
[ 0.154000] Performance Events: Broken PMU hardware detected, using software events only.
[ 0.154910] Failed to access perfctr msr (MSR c0010007 is 0)
[ 0.168665] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.169000] NMI watchdog: Shutting down hard lockup detector on all cpus
[ 0.171377] smpboot: Booting Node 0, Processors #1 OK
[ 0.009000] calibrate_delay_direct() dropping min bogoMips estimate 1 = 41792 25
[ 0.009000] calibrate_delay_direct() dropping max bogoMips estimate 3 = 57518 42
[ 0.245136] Brought up 2 CPUs
[ 0.245760] smpboot: Max logical packages: 2
[ 0.246000] smpboot: Total of 2 processors activated (15222.64 BogoMIPS)
[ 0.261000] devtmpfs: initialized
[ 0.277545] EVM: security.selinux
[ 0.278000] EVM: security.ima
[ 0.278000] EVM: security.capability
[ 0.288212] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.289000] pinctrl core: initialized pinctrl subsystem
[ 0.291000] RTC time: 1:49:34, date: 12/11/21
[ 0.292416] NET: Registered protocol family 16
[ 0.298319] ACPI: bus type PCI registered
[ 0.299000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.300000] dca service started, version 1.12.1
[ 0.302099] PCI: Using configuration type 1 for base access
[ 0.305000] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.305000] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.305066] mtrr: your CPUs had inconsistent MTRRdefType settings
[ 0.305574] mtrr: probably your BIOS does not setup all CPUs.
[ 0.306043] mtrr: corrected configuration.
[ 0.331000] ACPI: Added _OSI(Module Device)
[ 0.331053] ACPI: Added _OSI(Processor Device)
[ 0.331412] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.331992] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.332000] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.349000] ACPI: Interpreter enabled
[ 0.350000] ACPI: (supports S0 S3 S4 S5)
[ 0.350169] ACPI: Using IOAPIC for interrupt routing
[ 0.351997] PCI: Using host bridge windows from ACPI; if necessary, use "pci= nocrs" and report a bug
[ 0.353000] ACPI: Enabled 16 GPEs in block 00 to 0F
[ 0.384000] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.384675] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.385282] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.386000] acpi PNP0A03:00: fail to add MMCONFIG information, can't access e xtended PCI configuration space under this bridge.
[ 0.392000] acpiphp: Slot [3] registered
[ 0.392324] acpiphp: Slot [4] registered
[ 0.392834] acpiphp: Slot [5] registered
[ 0.393431] acpiphp: Slot [6] registered
[ 0.394000] acpiphp: Slot [7] registered
[ 0.394238] acpiphp: Slot [8] registered
[ 0.394796] acpiphp: Slot [9] registered
[ 0.395000] acpiphp: Slot [10] registered
[ 0.395115] acpiphp: Slot [11] registered
[ 0.395989] acpiphp: Slot [12] registered
[ 0.396000] acpiphp: Slot [13] registered
[ 0.396218] acpiphp: Slot [14] registered
[ 0.397000] acpiphp: Slot [15] registered
[ 0.397116] acpiphp: Slot [16] registered
[ 0.398000] acpiphp: Slot [17] registered
[ 0.398407] acpiphp: Slot [18] registered
[ 0.399000] acpiphp: Slot [19] registered
[ 0.399334] acpiphp: Slot [20] registered
[ 0.400000] acpiphp: Slot [21] registered
[ 0.400444] acpiphp: Slot [22] registered
[ 0.401000] acpiphp: Slot [23] registered
[ 0.401236] acpiphp: Slot [24] registered
[ 0.401959] acpiphp: Slot [25] registered
[ 0.402000] acpiphp: Slot [26] registered
[ 0.402274] acpiphp: Slot [27] registered
[ 0.403000] acpiphp: Slot [28] registered
[ 0.403209] acpiphp: Slot [29] registered
[ 0.403864] acpiphp: Slot [30] registered
[ 0.404000] acpiphp: Slot [31] registered
[ 0.404420] PCI host bridge to bus 0000:00
[ 0.404959] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.405070] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.406000] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff win dow]
[ 0.406054] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff win dow]
[ 0.407000] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.419163] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.420000] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.420133] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.420895] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.422000] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACP I
[ 0.423133] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.502086] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.503301] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.504000] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.505025] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.506000] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.510000] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem ,locks=none
[ 0.510103] vgaarb: loaded
[ 0.510505] vgaarb: bridge control possible 0000:00:02.0
[ 0.513000] SCSI subsystem initialized
[ 0.514576] ACPI: bus type USB registered
[ 0.515245] usbcore: registered new interface driver usbfs
[ 0.516181] usbcore: registered new interface driver hub
[ 0.517253] usbcore: registered new device driver usb
[ 0.518000] pps_core: LinuxPPS API ver. 1 registered
[ 0.518037] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti <giometti@linux.it>
[ 0.518934] PTP clock support registered
[ 0.520434] PCI: Using ACPI for IRQ routing
[ 0.526295] NetLabel: Initializing
[ 0.526646] NetLabel: domain hash size = 128
[ 0.527000] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.528532] NetLabel: unlabeled traffic allowed by default
[ 0.529755] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.530000] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.530452] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.534660] amd_nb: Cannot enumerate AMD northbridges
[ 0.535750] Switched to clocksource hpet
[ 0.700977] pnp: PnP ACPI init
[ 0.701547] ACPI: bus type PNP registered
[ 0.713391] pnp: PnP ACPI: found 6 devices
[ 0.715319] ACPI: bus type PNP unregistered
[ 0.791834] NET: Registered protocol family 2
[ 0.799988] TCP established hash table entries: 32768 (order: 6, 262144 bytes )
[ 0.801832] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.803590] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.805267] TCP: reno registered
[ 0.805305] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.807058] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.810882] NET: Registered protocol family 1
[ 0.817252] RPC: Registered named UNIX socket transport module.
[ 0.818658] RPC: Registered udp transport module.
[ 0.819188] RPC: Registered tcp transport module.
[ 0.819390] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.820700] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.821297] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.822527] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.827269] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.829053] software IO TLB [mem 0xbbfe0000-0xbffe0000] (64MB) mapped at [fff f976f3bfe0000-ffff976f3ffdffff]
[ 0.850233] sha1_ssse3: Neither AVX nor AVX2 nor SSSE3/SHA-NI is available/us able.
[ 0.853541] sha256_ssse3: Neither AVX nor SSSE3/SHA-NI is available/usable.
[ 0.860796] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.862825] Initialise system trusted keyring
[ 0.865582] audit: initializing netlink socket (disabled)
[ 0.868225] type=2000 audit(1639187373.867:1): initialized
[ 1.038353] bounce pool size: 64 pages
[ 1.039148] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.068417] zpool: loaded
[ 1.068727] zbud: loaded
[ 1.091244] NFS: Registering the id_resolver key type
[ 1.093314] Key type id_resolver registered
[ 1.093591] Key type id_legacy registered
[ 1.095171] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.098277] msgmni has been set to 7699
[ 1.101670] Key type big_key registered
[ 1.128671] NET: Registered protocol family 38
[ 1.132685] Key type asymmetric registered
[ 1.133793] Asymmetric key parser 'x509' registered
[ 1.135741] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 46)
[ 1.137949] io scheduler noop registered
[ 1.138680] io scheduler deadline registered (default)
[ 1.140567] io scheduler cfq registered
[ 1.140877] io scheduler mq-deadline registered
[ 1.142528] io scheduler kyber registered
[ 1.150597] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.152156] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.160196] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/inp ut0
[ 1.162205] ACPI: Power Button [PWRF]
[ 1.168330] GHES: HEST is not enabled!
[ 1.168574] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 1.173115] Serial: 8250/16550 driver, 20 ports, IRQ sharing enabled
[ 1.216812] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.244696] Non-volatile memory driver v1.3
[ 1.247840] Linux agpgart interface v0.103
[ 1.252106] crash memory driver: version 1.1
[ 1.252845] pan_gpio_init: dev not found
[ 1.254270] ------------[ cut here ]------------
[ 1.254774] WARNING: CPU: 1 PID: 1 at drivers/gpio/gpiolib.c:177 gpio_to_desc +0x94/0xe0
[ 1.255973] invalid GPIO 181
[ 1.256403] Modules linked in:
[ 1.256892] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.10.0-957.21.3.10.pan. x86_64 #1
[ 1.258536] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1 .8.2-0-g33fbe13 by qemu-project.org 04/01/2014
[ 1.260071] Call Trace:
[ 1.260847] [<ffffffff99171bac>] dump_stack+0x19/0x1b
[ 1.262225] [<ffffffff988930a8>] __warn+0xd8/0x100
[ 1.263764] [<ffffffff997f393e>] ? cn_proc_init+0x38/0x38
[ 1.264400] [<ffffffff99798971>] ? initcall_blacklist+0xb8/0xb8
[ 1.265485] [<ffffffff9889312f>] warn_slowpath_fmt+0x5f/0x80
[ 1.266053] [<ffffffff98aa87b3>] ? proc_register+0x53/0xb0
[ 1.266230] [<ffffffff98c9cab4>] gpio_to_desc+0x94/0xe0
[ 1.271530] [<ffffffff98c9da12>] gpio_request+0x12/0x20
[ 1.272227] [<ffffffff997f3a1c>] pan_gpio_init+0xde/0x1c3
[ 1.273989] [<ffffffff997f393e>] ? cn_proc_init+0x38/0x38
[ 1.274679] [<ffffffff988020fa>] do_one_initcall+0xba/0x230
[ 1.276345] [<ffffffff997991bc>] kernel_init_freeable+0x195/0x243
[ 1.277065] [<ffffffff99164b10>] ? rest_init+0x80/0x80
[ 1.281638] [<ffffffff99164b1e>] kernel_init+0xe/0xf0
[ 1.282120] [<ffffffff991862e4>] ret_from_fork_nospec_begin+0xe/0x21
[ 1.284858] [<ffffffff99164b10>] ? rest_init+0x80/0x80
[ 1.285705] ---[ end trace 61e2f6311443d0d7 ]---
[ 1.285705] gpiod_request: invalid GPIO
[ 1.285705] pan_gpio_init: skipping gpio 181 - ret -22
[ 1.289294] ------------[ cut here ]------------
[ 1.289866] WARNING: CPU: 1 PID: 1 at drivers/gpio/gpiolib.c:177 gpio_to_desc +0x94/0xe0
[ 1.290176] invalid GPIO 182
[ 1.291052] Modules linked in:
[ 1.291456] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W ---------- -- 3.10.0-957.21.3.10.pan.x86_64 #1
[ 1.291840] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1 .8.2-0-g33fbe13 by qemu-project.org 04/01/2014
[ 1.293377] Call Trace:
[ 1.293658] [<ffffffff99171bac>] dump_stack+0x19/0x1b
[ 1.294093] [<ffffffff988930a8>] __warn+0xd8/0x100
[ 1.294331] [<ffffffff997f393e>] ? cn_proc_init+0x38/0x38
[ 1.295969] [<ffffffff99798971>] ? initcall_blacklist+0xb8/0xb8
[ 1.298751] [<ffffffff9889312f>] warn_slowpath_fmt+0x5f/0x80
[ 1.299559] [<ffffffff9916f027>] ? printk+0x5a/0x76
[ 1.300569] [<ffffffff98c9cab4>] gpio_to_desc+0x94/0xe0
[ 1.301305] [<ffffffff98c9da12>] gpio_request+0x12/0x20
[ 1.301305] [<ffffffff997f3a1c>] pan_gpio_init+0xde/0x1c3
[ 1.302608] [<ffffffff997f393e>] ? cn_proc_init+0x38/0x38
[ 1.302886] [<ffffffff988020fa>] do_one_initcall+0xba/0x230
[ 1.302886] [<ffffffff997991bc>] kernel_init_freeable+0x195/0x243
[ 1.304958] [<ffffffff99164b10>] ? rest_init+0x80/0x80
[ 1.305194] [<ffffffff99164b1e>] kernel_init+0xe/0xf0
[ 1.306193] [<ffffffff991862e4>] ret_from_fork_nospec_begin+0xe/0x21
[ 1.306937] [<ffffffff99164b10>] ? rest_init+0x80/0x80
[ 1.307117] ---[ end trace 61e2f6311443d0d8 ]---
[ 1.309325] gpiod_request: invalid GPIO
[ 1.309662] pan_gpio_init: skipping gpio 182 - ret -22
[ 1.311695] cpld cpld.1536: Failed to request region 0x600-0x63f
[ 1.311894] cpld: probe of cpld.1536 failed with error -16
[ 1.316507] cpld: Found cpld chip with rev ID=0xff
[ 1.319059] Guest personality initialized and is inactive
[ 1.321439] VMCI host device registered (name=vmci, major=10, minor=61)
[ 1.322153] Initialized host personality
[ 1.324056] rdac: device handler registered
[ 1.325879] hp_sw: device handler registered
[ 1.326466] emc: device handler registered
[ 1.328553] alua: device handler registered
[ 1.332405] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 200 6)
[ 1.335764] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 1.337455] megasas: 07.705.02.00-rh1
[ 1.338929] 3ware 9000 Storage Controller device driver for Linux v2.26.02.01 4.rh1.
[ 1.341625] VMware PVSCSI driver - version 1.0.7.0-k
[ 1.361209] scsi host0: ata_piix
[ 1.365805] scsi host1: ata_piix
[ 1.367780] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc200 irq 14
[ 1.368407] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc208 irq 15
[ 1.376722] libphy: Fixed MDIO Bus: probed
[ 1.378669] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 1.381583] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.383032] Fusion MPT base driver 3.04.20
[ 1.383584] Copyright (c) 1999-2008 LSI Corporation
[ 1.385046] Fusion MPT SPI Host driver 3.04.20
[ 1.386725] Fusion MPT SAS Host driver 3.04.20
[ 1.389258] Fusion MPT misc device (ioctl) driver 3.04.20
[ 1.391293] mptctl: Registered with Fusion MPT base driver
[ 1.392923] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 1.395456] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.398331] ehci-pci: EHCI PCI platform driver
[ 1.398749] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.400455] ohci-pci: OHCI PCI platform driver
[ 1.401912] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.404565] usbcore: registered new interface driver usbserial_generic
[ 1.406030] usbserial: USB Serial support registered for generic
[ 1.408368] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x6 4 irq 1,12
[ 1.412334] random: fast init done
[ 1.413181] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.416896] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.419996] mousedev: PS/2 mouse device common for all mice
[ 1.429687] rtc_cmos 00:00: RTC can wake from S4
[ 1.433633] input: AT Translated Set 2 keyboard as /devices/platform/i8042/se rio0/input/input1
[ 1.439635] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 1.444005] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.444567] i2c /dev entries driver
[ 1.450631] cpuidle: using governor menu
[ 1.452894] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.457584] usbcore: registered new interface driver usbhid
[ 1.459829] usbhid: USB HID core driver
[ 1.461931] hv_vmbus: registering driver hv_storvsc
[ 1.464701] drop_monitor: Initializing network drop monitor service
[ 1.467984] TCP: cubic registered
[ 1.468532] Initializing XFRM netlink socket
[ 1.471447] NET: Registered protocol family 10
[ 1.481760] NET: Registered protocol family 17
[ 1.483992] Key type dns_resolver registered
[ 1.495042] Loading compiled-in X.509 certificates
[ 1.513209] Loaded X.509 cert 'PANOS Linux in-tree module signing key: 009db4 995d6beef549be0e272ce66c20aa000d21'
[ 1.516602] registered taskstats version 1
[ 1.542481] Key type trusted registered
[ 1.554203] Key type encrypted registered
[ 1.555657] IMA: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.557321] ata2.00: ATAPI: QEMU DVD-ROM, 2.4.0, max UDMA/100
[ 1.565887] Magic number: 1:753:811
[ 1.568173] rtc_cmos 00:00: setting system clock to 2021-12-11 01:49:36 UTC ( 1639187376)
[ 1.572338] Loading PAN platform type
[ 1.576541] ata1.00: ATA-7: QEMU HARDDISK, 2.4.0, max UDMA/100
[ 1.577882] ata1.00: 125829120 sectors, multi 16: LBA48
[ 1.583222] ata2.00: configured for MWDMA2
[ 1.592835] ata1.00: configured for MWDMA2
[ 1.608052] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 0 PQ : 0 ANSI: 5
[ 1.636193] sd 0:0:0:0: [sda] 125829120 512-byte logical blocks: (64.4 GB/60. 0 GiB)
[ 1.648707] sd 0:0:0:0: [sda] Write Protect is off
[ 1.651489] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA
[ 1.666122] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.4. PQ : 0 ANSI: 5
[ 1.686285] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 1.706731] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.718669] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.719381] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.284587] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042 /serio1/input/input2
[ 2.290729] md: Waiting for all devices to be available before autodetect
[ 2.292586] md: If you don't use raid, use raid=noautodetect
[ 2.297205] md: Autodetecting RAID arrays.
[ 2.297205] md: autorun ...
[ 2.299494] md: ... autorun DONE.
[ 2.322458] kjournald starting. Commit interval 5 seconds
[ 2.323784] EXT3-fs (sda2): mounted filesystem with writeback data mode
[ 2.326275] VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
[ 2.335684] devtmpfs: mounted
[ 2.342226] Freeing unused kernel memory: 1996k freed
[ 3.368527] random: crng init done

 


eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::e43:4cff:fe10:1d00 prefixlen 64 scopeid 0x20<link>
ether 0c:43:4c:10:1d:00 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 7 bytes 566 (566.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

[ 1030.727042] hrtimer: interrupt took 2873100 ns

3 REPLIES 3

Cyber Elite
Cyber Elite

@PAFrank,

In your install I would expect that to be the last message displayed prior to the actual PAN-OS CLI loading. How long did you let this stay running before you restarted it to actually let it get to the login prompt? Depending on your specs getting there can take quite a bit. 

L2 Linker

Thank you BPry for your reply! 

Do you mean how long the status stay there? I tested it many times. It kept for long time. 

Maybe some config wrong. Can you tell what I need to try to fix it? Thank you very much. I appreciate

Cyber Elite
Cyber Elite

@PAFrank,

EVE-NG configurations aren't something that I would want to troubleshoot over a forum, so if something was wrong on that end that I would leave up to you to review. Depending on the hardware you are trying to run this on, your version of a long time and what is actually required to load into PAN-OS could be two very different things. How long did you actually let it sit before you reset the VM? 

 

At this point either you didn't let it sit long enough to finish booting, or you have an issue with your GNS3 configuration. I would reach out to a GNS3 community  or the subreddit for more specific help on that side of things. 

  • 2940 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!