rate limiting quesion

L1 Bithead

rate limiting quesion

What if I want to just say all traffic on internet ethernet1/1 is limited to 50 mbps down and 50 mbps up?  I the gui I am seeing something for clear text and tunneled traffic, what If I just want to limit all traffic to 50 up and down?  Is this possible?

L3 Networker

You could apply QOS profile to the public interface. But the QOS profile should be applied to the egress interface.

Depending on your network set up and the flow of traffic we need to apply to the egress interfaces appropriately.

For more info on QOS please refer to the following document.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!