We have dual ISP (ISP-A and ISP-B) and utilizting PBR which works just fine. Now I have use case whereas I have a NAT configured on ISP-B (1 to 1) and I want to force traffic to a specific destination out the backup interface. I want to do this to ensure traffic destined for a specific address IP-B is sent out the backup interface. I tried adding a specific route on the VR with the interface and next hop as ISP-B but the path from behind the PAN still takes the primary interface and hop.
I am missing something but not sure what?
Solved! Go to Solution.
It'll kill traffic depending on what the identified application is; however if you kept sending the traffic it would continue to use the established session which is what you were running into. Going forward if you want to verify that the traffic isn't running on an old session use the 'clear session all filter' command from the CLI and you can specify everything you did with the test command to ensure all traffic will be utilizing the new policies.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!