We facing an strange issue regarding filtering to some destinations.
We have a rule with 2 kinds of destination address:
1. Static Group Address defined in Palo Alto
2. External dynamic list (2 of them)
Those address are attached to a deny rule because are malicious url.
When take a look to the traffic log, we see that traffic hits the rule but the action is allow. We are running version 8.X
Any suggestion about that behaviour?
Can you provide a bit more info?
i'm assuming the traffic being allowed is not actually hitting that policy rule in the logs?
also just to clarify:
you have 1 rule: containing a address group object. and 2 dynamic lists. not 2 sepearate rules?
Mind sharing the EDL url's?
also if the EDL uses url's, domains. make sure when to see if in monitoring tab the traffic being allowe dyou can resolve the url( checkbox at bottom of the page)
Hi @nanukanu ,
My guess is that the traffic is allowed because the application isn't fully identified yet ...
It's normal for the firewall to allow some packets through to allow it to identify the application as seen in this article :
Once the application is identified correctly it should block.
Hope this helps.
Hi @nanukanu ,
If you can't reach the EDL then there will not be anything to match on.
As for having both static and dynamic in one policy ... my guess it will process top down like a normal policy check. Static IPs are listed on top so they are checked first. If there's no match then it will process further down to the EDL lists. I haven't confirmed this but this seems logical to me.
Depending on what EDL you have configured you are limited on where you can use it :
You can use an IP address list as an address object in the source and destination of your policy rules;
you can use a URL List in Objects > Security Profiles > URL Filtering or as a match criteria in Security policy rules;
you can use a domain list in Objects > Security Profiles > Anti-Spyware Profile for sinkholing specified domain names.
Thank you for your response but not seems to clarify this behaviour.
Why action allow if rule says block? There's nothing to evaluate, just if you are trying to go to any address inside the EDL or static addres group just deny.
I understand what you say about identify application, but in this case it's just IP to IP decision.
Any suggestion in this case?
After separate the rules (one with EDL and other with static group) seems that all is working fine, so it's something related about how PAN treat EDL and Static Groups in the same rule. Any new suggestion on that?
What type are the EDLs? You mentioned that they are d URL list type, is that correct?
It is also possible that the firewall is allowing some traffic in order to get the actual URLs from the data. Once it retriefs the URLs it will evaluate the rules again to see if the this traffic is stil matching this rule (before that it is potential match, that is why some packets are allowed).
You should be easy to confirm if you filter the logs by address and not by rule name - that should give you all the rules that this traffic has hit.
But if you are right and the reason is that EDL is being used with static group in the same rule...This looks weard, not sure that the FW should act like that.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!