I am setting up a new M100 as a dedicated log collector, and wanted to share a day of frustration with a resolution.... After following the Panorama guide for setup, I was unable to see the Disks in the Disk tab under Managed Collectors on the Panorama management server to enable the disks. I've tried manually editing the fields but it does not take. When commiting changes to Panorama I get following warning message - "No disks enabled on log collector". In addition, the new dedicated log collector does not show as connected in the Managed Collectors screen, but it does show connected in Managed Devices.
When I SSH to the dedicated log collector, disk space and raid seem to indicate everything is there -
admin@dc2log> show system disk-space
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 7.6G 1.7G 5.6G 23% /
/dev/sda5 23G 1.7G 20G 8% /opt/pancfg
/dev/sda6 16G 2.0G 13G 14% /opt/panrepo
tmpfs 7.9G 0 7.9G 0% /dev/shm
/dev/sda8 56G 17G 36G 33% /opt/panlogs
/dev/loop0 16G 173M 15G 2% /opt/logbuffer
/dev/md2 917G 200M 871G 1% /opt/panlogs/ld2
/dev/md3 917G 200M 871G 1% /opt/panlogs/ld3
/dev/md4 917G 200M 871G 1% /opt/panlogs/ld4
/dev/md1 917G 200M 871G 1% /opt/panlogs/ld1
admin@dc2log> show system raid
Disk Pair A Available
Disk id A1 Present
Disk id A2 Present
Disk Pair B Available
Disk id B1 Present
Disk id B2 Present
Disk Pair C Available
Disk id C1 Present
Disk id C2 Present
Disk Pair D Available
Disk id D1 Present
Disk id D2 Present
The dedicated log collector should not be in the Managed Devices section. Removing the dedicated log collector from Managed Devices, enables it for Managed Collectors and disks can be selected.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!