i am in the process of setting up a pan 200. i have configured the mgnt interface, 2 interfaces (1 internal, 1 external) each in there own zone and both in the same virtual router. the problem i am having is i cannot get to the internet or should i say have it pass traffic. i can ping all local devices LAN, i can ping this as the gateway on my lan, the mgnt interface. but not out the external L3 interface either by ip or dns. in my virtual router i have it set 0.0.0.0/0 next ip 126.96.36.199 (which is the gateway for my comcast circuit). i confirmed this by setting a static ip on my laptop and plugging it in to the comcast modem. i was able to get out no problem. i have the default policy that comes with the box from the factory allowing any app/port/protocol out any interface as well.
any help would be appreciated. i am sure it is something simple but i cannot find what i am missing. i can post screenshots or the config if i needed
Solved! Go to Solution.
I would also suggest that you read the document "Understanding PAN-OS NAT"
This will give you basic understanding on how to setup NAT ans security policy for various scenarios.
you said that you created two interfaces and added a route for 0.0.0.0/0. The default policy is for the virtual wire and doesn't match layer 3 Zones. If you already created a NAT rule like the other guys mentioned, you should create a new policy with the zones from your L3-Interfaces.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!