SIPVicious Scanner Detection

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

SIPVicious Scanner Detection

L4 Transporter

is it just me or anyone seeing SIPVicious Scanner Detection alerts a lot recently?

1 accepted solution

Accepted Solutions

Cyber Elite
Cyber Elite

Hello,

Join the club. I have seen them for over 7 years now. I created a special modified policy to drop the traffic. Yes it common and so are a bunch of others such as shodan, etc.

 

Regards,

View solution in original post

10 REPLIES 10

Cyber Elite
Cyber Elite

Hello,

Join the club. I have seen them for over 7 years now. I created a special modified policy to drop the traffic. Yes it common and so are a bunch of others such as shodan, etc.

 

Regards,

@OtakarKlier can you please let me know the policy details. I'll try to create it on my end. these are creating a lot of noise on my firewalls.

Same problem! Could you please share with me  the policy details?

@OtakarKlier  Same problem! Could you please share with me  the policy details?

Any chance I could get the details on the rule you created or is it posted somewhere?

Hello,

In your Vulnerability profile, set it to block anything medium and higher. SipVicious used to be low but since I block anything medium and higher, a custom policy is not longer required for me. But you can still block/unblock is with an exception.

OtakarKlier_0-1604529614363.png

 

Just change the action to like drop.

 

Regards,

L0 Member

I am a new user of a Palo Alto firewall. Where would I set up this policy? we are running version 9.1.12. Sorry, just a newbie here. I have tried finding it and am having problems.

 

Thank you,

 

Bridget

Cyber Elite
Cyber Elite

Hello,

Welcome. Here is how you would perform this.

Click on 'Objects' at the top

Then 'Vulnerability Protection' on the left.

Click on the name of the policy you wish to add the exclusion to (you cannot change the strict or default policies that are there by default, you will need to 'Clone' (at the bottom)  one and edit that.

Once the profile is opened, click 'Exceptions tab.

At the bottom click 'Show All Signatures', in the search/filter bar type SIPVicious

This will display the policy that is alerting.

Click the 'Enable' checkbox on the left.

Click OK

Click 'Commit' in the upper right to send the changes to the configuration (running and start)

 

Hope this helps.

So first I have to set up a policy to check for these alerts?

Cyber Elite
Cyber Elite

Hello,

That is correct. The Security Policy is the one that actually does the enforcement on the configuration set on it. Say you have a security policy and no profiles set, then this policy will not be looking for such things as the SIPVicious scanner, etc. I would recommend setting up your Security Profiles first then add those to the Security Policies.

 

Hope that makes sense.

 

  • 1 accepted solution
  • 18536 Views
  • 10 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!