I want to know if there is a way to forward all switch traffic to single Destination port of Palo alto. So far I can find on switch side you can make a singel port source and destination the PA port. Just want to know if we can monitor all ports on the switch?
you could theoretically forward _all_ ports to a single port on the switch, but unless your network doesn't have a lot of traffic that will bring down your switch
you may want to ask this on the forum of your preferred switch manufacturer
if you really need to monitor everything you could supersegment your switch so each port has a single vlan, then connect the firewall via a trunk and create a subinterface for each vlan, that way all traffic needs to go through the firewall.
you could set it to layer2 mode if you don't want to route and subnet
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!