Troubleshooting device with orange status light

Reply
Poe
Not applicable

Is it possible to install a TFTP client on your local system and then use "tftp export ..." to export the running configuration file? You may want to view this to ensure your running config is the config you want.

I have a PA-200 I am building for a site now, and the light for status is off during bootup, then shows orange, then goes green. Under the State for "show management-clients" it shows "P2-Ok" and a progress of 100 on most of the items that show as init for you. The last time I had an issue with a box not responding to management interface it was an RMA after support could not fix the issue.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!