Currently I have the problem to build an IPSec tunnel between a PA200 (A) and a PA220 (B).
My one side A has a Telekom hybrid Internet connection (its a german product with LTE and cable connection) to a Speedport router. Thus only one dynamic official IP.
The other side B is a normal company connection with a fixed IP address. I have configured my tunnel so that only side A is allowed to start the tunnel. (B side enable passive mode)
If I now start the tunnel on page A, I also see in the monitoring at page B the requests ike on port 500 for port 500. Unfortunately then nothing happens further and page A has then a Faild Due to timeout.
You can also see that page A transmits data but does not receive any data.
What could that be? What is the best way to narrow down the problem?
I have sites with multiple VPN's and I think I understand what you are trying to accomplish. You want all traffic to go down TunnelA as primary with TunnelB as secondary? If yes, setup the tunnels the same with settings on both. Both tunnels will be up at the same time, this is OK. Then control traffic with routing, either static routes with monitors and weights or OSPF with Metrics.
Hope that helps.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!