Ubuntu 16.04 LTS support for Minemeld

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Ubuntu 16.04 LTS support for Minemeld

L4 Transporter

Hi @lmori,

 

Is there any support for Ubuntu 16.04 or later? Or is Minemeld still only supported on 14.04?

 

Thanks!

 

Regards,

Bo

1 accepted solution

Accepted Solutions

L5 Sessionator

@borising : You can give the MineMeld Ansible Playbook a try. It's been reported to succesfully deploy MineMeld in Ubuntu 16.04.

 

Xavi

View solution in original post

15 REPLIES 15

L5 Sessionator

@borising : You can give the MineMeld Ansible Playbook a try. It's been reported to succesfully deploy MineMeld in Ubuntu 16.04.

 

Xavi

Hey @xhoms,

 

I'll try that out and update this thread afterwards with my findings.

 

Regards,

Bo

Hi @xhoms

 

This worked perfectly, thank you for helping out!

 

Regards,

Bo

I found some issue when installed mindmeld on Ubuntu.

 

Screenshot from 2018-07-10 09-58-36.png

Could you recommend me?


@xhoms wrote:

@borising : You can give the MineMeld Ansible Playbook a try. It's been reported to succesfully deploy MineMeld in Ubuntu 16.04.

 

Xavi


 

xhoms please help.

This suggestion might come a little too late, but, I have decided to post it anyway.

 

I ran into a problem with nginx during the ansible-notebook install. Please see below:

TASK [infrastructure : install packages] ***************************************************
changed: [127.0.0.1] => (item=rabbitmq-server)
changed: [127.0.0.1] => (item=redis-server)
changed: [127.0.0.1] => (item=collectd-core)
failed: [127.0.0.1] (item=nginx)

In order to solve this issue, I followed the instructions from this askubuntu post:

https://askubuntu.com/questions/764222/nginx-installation-error-in-ubuntu-16-04/805283#805283

 

I also followed this advice from a hurricanelabs pdf. I personally did not experienced the issue before editing the webui.yml, but I think it's worth a look:

https://www.hurricanelabs.com/docs/minemeld_user_guide.pdf#page=8&zoom=90,-354,680

 

I ran the following command to do the install:

ansible-playbook -K -e "minemeld_version=master" -i 127.0.0.1, local.yml

Everything went smoothly after that, and did not notice any other errors during the install, which takes a while.

sudo -u minemeld /opt/minemeld/engine/current/bin/supervisorctl -c /opt/minemeld/supervisor/config/supervisord.conf status
minemeld-engine                  RUNNING   pid 1443, uptime 0:00:31
minemeld-supervisord-listener    RUNNING   pid 1442, uptime 0:00:31
minemeld-traced                  RUNNING   pid 1444, uptime 0:00:31
minemeld-web                     RUNNING   pid 1445, uptime 0:00:31

Hope this helps!

 

Cheers,

 

Fer

Keep getting this error when running the ansible playbook

 

 

TASK [minemeld : requirements] *************************************************************************************************************************************************

fatal: [127.0.0.1]: FAILED! => {"changed": false, "cmd": "/opt/minemeld/engine/current/bin/pip2 freeze", "msg": "\n:stderr: Traceback (most recent call last):\n  File \"/opt/minemeld/engine/current/bin/pip2\", line 7, in <module>\n    from pip._internal import main\n  File \"/opt/minemeld/engine/0.9.52.post1/local/lib/python2.7/site-packages/pip/_internal/__init__.py\", line 19, in <module>\n    from pip._vendor.urllib3.exceptions import DependencyWarning\n  File \"/opt/minemeld/engine/0.9.52.post1/local/lib/python2.7/site-packages/pip/_vendor/urllib3/__init__.py\", line 8, in <module>\n    from .connectionpool import (\n  File \"/opt/minemeld/engine/0.9.52.post1/local/lib/python2.7/site-packages/pip/_vendor/urllib3/connectionpool.py\", line 29, in <module>\n    from .connection import (\n  File \"/opt/minemeld/engine/0.9.52.post1/local/lib/python2.7/site-packages/pip/_vendor/urllib3/connection.py\", line 2, in <module>\n    import datetime\nImportError: No module named datetime\n"}

to retry, use: --limit @/home/ubuntu/minemeld-ansible/local.retry

 

PLAY RECAP *********************************************************************************************************************************************************************

127.0.0.1                  : ok=33  changed=2    unreachable=0    failed=1

Me too:

 

ASK [minemeld : gulp build] *******************************************************************************************************************

fatal: [127.0.0.1]: FAILED! => {"changed": true, "cmd": ["gulp", "build"], "delta": "0:00:14.231891", "end": "2019-02-26 21:45:23.642662", "msg": "non-zero return code", "rc": 1, "start": "2019-02-26 21:45:09.410771", "stderr": "", "stderr_lines": [], "stdout": "[21:45:10] Using gulpfile /opt/minemeld/www/webui/gulpfile.js\n[21:45:10] Starting 'scripts'...\n[21:45:10] Starting 'styles'...\n[21:45:10] 'styles' errored after 40 ms\n[21:45:10] Error: ENOENT: no such file or directory, scandir '/opt/minemeld/www/webui/node_modules/node-sass/vendor'\n    at Error (native)\n    at Object.fs.readdirSync (fs.js:961:18)\n    at Object.getInstalledBinaries (/opt/minemeld/www/webui/node_modules/node-sass/lib/extensions.js:121:13)\n    at foundBinariesList (/opt/minemeld/www/webui/node_modules/node-sass/lib/errors.js:20:15)\n    at foundBinaries (/opt/minemeld/www/webui/node_modules/node-sass/lib/errors.js:15:5)\n    at Object.module.exports.missingBinary (/opt/minemeld/www/webui/node_modules/node-sass/lib/errors.js:45:5)\n    at module.exports (/opt/minemeld/www/webui/node_modules/node-sass/lib/binding.js:15:30)\n    at Object.<anonymous> ./src/app/dashboard/dashboard.controller.ts", "[173, 19]: comment must start with lowercase letter", "", "", "WARNING in ./src/app/system/system.controller.ts", "[105, 34]: == should be ===", "[125, 34]: == should be ===", "[150, 34]: == should be ===", "[199, 34]: == should be ===", "", "", "WARNING in ./src/app/system/extensions.controller.ts", "[528, 15]: comment must start with lowercase letter", "[416, 56]: == should be ===", "[509, 30]: == should be ===", "", "", "WARNING in ./src/app/config/config.controller.ts", "[205, 34]: == should be ===", "[205, 68]: == should be ===", "[610, 37]: == should be ===", "[633, 28]: == should be ===", "[726, 32]: == should be ===", "", "", "WARNING in ./src/app/config/configimport.controller.ts", "[403, 9]: for (... in ...) statements must be filtered with an if statement", "", "", "WARNING in ./src/app/config/configadd.controller.ts", "[111, 59]: == should be ===", "[157, 24]: == should be ===", "[187, 25]: == should be ===", "[194, 31]: == should be ===", "", "", "WARNING in ./src/app/admin/admin.users.controller.ts", "[59, 13]: unused variable: 'lastUser'", "[68, 31]: == should be ===", "", "", "WARNING in ./src/app/indicatoradd/indicatoradd.controller.ts", "[188, 29]: forbidden bitwise operation", "", "", "WARNING in ./src/app/services/minemeldapi.ts", "[197, 20]: == should be ===", "", "", "WARNING in ./src/app/services/status.ts", "[320, 12]: trailing whitespace", "", "", "WARNING in ./src/app/services/prototype.ts", "[16, 28]: comment must start with lowercase letter", "", "", "WARNING in ./src/app/services/events.ts", "[110, 63]: == should be ===", "", "", "WARNING in ./src/app/services/traced.ts", "[224, 21]: forbidden bitwise operation", "[226, 38]: forbidden bitwise operation", "[226, 38]: forbidden bitwise operation", "", "", "WARNING in ./src/app/services/enginestatus.ts", "[85, 50]: != should be !==", "[111, 30]: != should be !==", "", "", "WARNING in ./src/app/services/jobs.ts", "[122, 35]: != should be !==", "[126, 39]: != should be !==", "", "", "WARNING in ./src/app/services/currentuser.ts", "[51, 30]: == should be ===", "", "", "WARNING in ./src/app/components/navbar/navbar.directive.ts", "[79, 28]: != should be !==", "[84, 45]: != should be !==", "", "", "WARNING in ./src/app/components/suggestion/suggestion.directive.ts", "[31, 9]: 'toastr' cannot be declared in the constructor", "[32, 9]: '$modal' cannot be declared in the constructor", "[93, 17]: '$modalInstance' cannot be declared in the constructor", "[58, 19]: expected parameter: 'result' to have a typedef", "[60, 28]: expected parameter: 'success' to have a typedef", "[63, 26]: expected parameter: 'error' to have a typedef", "[75, 19]: expected parameter: 'result' to have a typedef", "", "[21:45:23] Finished 'scripts' after 13 s"]}

to retry, use: --limit @/home/ubuntu/minemeld-ansible/local.retry

 

PLAY RECAP *************************************************************************************************************************************

127.0.0.1                  : ok=58  changed=11  unreachable=0    failed=1   

What command in particular were you running?

 

ansible-playbook -K -i 127.0.0.1, local.yml

 

or

 

ansible-playbook -K -e "minemeld_version=master" -i 127.0.0.1, local.yml

ansible-playbook -K -e "minemeld_version=master" -i 127.0.0.1, local.yml

 

 

 

 

TASK [minemeld : npm install lodash] **************************************************************************************************************************************************************************************

fatal: [127.0.0.1]: FAILED! => {"msg": "template error while templating string: expected token 'end of print statement', got 'bui_repo_directory'. String: {{www_venv_directory}}/lib/node_modules/.bin:{{www_venv_directory}}/bin:{{we bui_repo_directory}}/node_modules/.bin:{{ ansible_env.PATH }}"}

to retry, use: --limit @/home/ubuntu/minemeld-ansible/local.retry

 

PLAY RECAP ****************************************************************************************************************************************************************************************************************

127.0.0.1                  : ok=58  changed=11  unreachable=0    failed=1   

 

 

ansible-playbook -K -e "minemeld_version=master" -i 127.0.0.1, local.yml --limit @/home/ubuntu/minemeld-ansible/local.retry

We will soon switch our binary distribution to 16.04.

 

Hi.

 

 Any timeframe.  Just curious. 

 

Thanks for the response

Shall be out this week

  • 1 accepted solution
  • 16807 Views
  • 15 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!