Upgrading 7.1 to 8.0: New Log Storage

Reply
L2 Linker

@jdelio, thank you for the link, as we have dedicated log collectors - physical appliances, so I guess the last command you supplied won't be applicable for us? I am trying to get a clear instruction on upgrading our environment, so far your comment above seems the closest one. As the option for labbing this up is restricted, since we don't have any spare log collectors to test, and also the log conversation process sounds like irreversible, so I am a bit nervous.

Community Team Member

@Fengrui, You either have Log collectors and use the first command:

> request logdb migrate lc serial-number<serial_number> start

 

Or you do not have external log collectors, and you would then just upgrade the logdb:

> request logdb migrate vm start

 

 

LIVEcommunity team member
Stay Secure,
Joe
Don't forget to Like items!
L2 Linker

Has anyone migrated an m100 log collector or log collector group? If so how long did it take for the process to complete? I am assuming, log viewing and report generation will be degraded on the Panorama.

L1 Bithead

We just recently upgraded our Panorama management pair (HA) from 7.1.9 to 8.0.4 and  then proceeded to upgrade one of our dedicated M-500 log collectors.  We ran into an issue which to this point has stumped support.  I launch the log migration command from our management box against the upgrade LC and it launches fine with no errors but just sits at 0% complete and the time remaining on the clock just keeps increasing  (see output of status command):  497k hour remaining!

 

Slot: all
Migration State: In Progress
Percent Complete: 0.00
Estimated Time Remaining:497597 hour(s) 58 min(s)

 

We have no logging or reporting within Panorama available for this 1 LC at this point.  We have been without it now for over 1.5 months.  We were recently instructed to upgrade to version 8.0.5 which I did this morning on our management boxes and LC and it is still hanging at 0% complete.  Supposedly there were issues addresses specifically to the log migration process in this version.   I am at the point where I just want to rebuild or wipe our M500 and start over.  Any one have any ideas?

Thanks in advance!

L2 Linker

Hi Andrew,

 

Your upgrade and migration sounds similar to mine. I think your gonna have to make a decision from the secruity standpoint, have zero visibility vs waiting on a fix?  Check out my post below.

 

https://live.paloaltonetworks.com/t5/General-Topics/Log-collector-on-8-0-and-panorama-FW-s-on-7-1-Co...

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!