Url Filtering Virtual Wire

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Url Filtering Virtual Wire

Not applicable

We are waiting on some changes with our carrier and are using PA2050 set up as a virtual wire. I am trying to enable url filtering and when I enable the rule, it blocks all HTTP traffic.

When i set policy to deny, it denies all traffic. Thoughts?

2 REPLIES 2

L4 Transporter

How is your URL Filter Profile setup ? Screenshot ?

I can see from your screenshot there is at least one other security rule above the "VWIRE_URL_FILTER" rule. Can you show the complete rulebase ?

URL Filtering can only be applied to web traffic, so you might consider to replace Application "any" with web-browsing for a start.

Found out that the url filtering is not working because i dont have the url definitions installed. Rule is working but no filtering is going on because no defs

  • 3050 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!