Website not displaying - https://www.labeebyacademy.co.uk
cancel
Showing results for 
Search instead for 
Did you mean: 

Website not displaying - https://www.labeebyacademy.co.uk

L2 Linker

Greetings,

 

I hoping you guys can help me with getting to a website called "https://www.labeebyacademy.co.uk/".

 

When a user tries to go to this website it does not load. When going through my other firewall of the other site it works fine.

 

I have tried several things on the firewall, but this still fails to load.

 

The website resolves to 46.37.179.197. I have PCAPs on this from the firewall.

 

I have tried several things from the firewall:

 

-Tried creating an allow all policy for one IP

-Checked the correct NAT policy is being applied

-dropped the MTU size on the external interface to various values, but this made no difference

-disabled the decryption rules

 

Now I have come to the stage of doing the pcaps from the firewall.

 

I do suspect this to be an MTU issue. I am not sure if reducing the MTU on the external interface was correct.

 

I have uploaded the PCAPS here hope you guys can advise further.

 

Many Thanks,

 

 

 

 

 

5 REPLIES 5

Cyber Elite
Cyber Elite

I'm not seeing any PCAPs but I can load this website on my end perfectly fine; so I don't think MTU would be the issue unless you have changed it from default on your end for some reason. Also keep in mind that depending on your ISP changing the MTU on your end may not actually be doing anything, the ISP can controll the MTU on their link so if you suspect it to be MTU make sure that they aren't monkeying around with that after it leaves your network. 

Sorry for the delay in my reply.

 

I do not think this is ISP issue. As there are two firewalls for two sites and the other site with the same ISP is working.

 

I have uploaded the following snips:

 

tx_capture - is the transmit packet capture

fw_capture - is the firewall packet capture

rc_capture - is the recieve packet capture FW_Capture.PNGRC_Capture.PNGtx_capture.PNG

 

 

 

PCAPs suggests you never got 3way handshake established for this particular website. Did you try to ping or run a traceroute from the firewall to the 46.37.179.197? How about threat logs (if profiles applied to the zone)

Just have tried both ping and traceroute are disabled (not responding) for this website. So l did a little test from my FW to confirm 3way handshake:

 

ssh.PNG

 

3way.PNG

 

But why this particular website only is not working for you???

Hi, 

 

Thanks for the info. I am not sure why it is only this website, but I think I have found out where the issue may lie. 

 

I think it may be a routing issue in the network, which needs to be corrected. I will let you know if that resolves the issue. 

 

 

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!