04-26-2021 10:35 AM
We have been using GlobalProtect for awhile but I just became aware that none of our clients are connected using IPSec even though the option is checked.
I can't see anything being blocked so I am wondering if it is a configuration issue of some kind.
Note: we are using loopback interfaces and both the gateway and portal use the same loopback
04-27-2021 11:22 AM
well...I added a 2nd ip to external interface, created new tunnel, security zone, gateway, portal, added new security policy and altered the local host file on my laptop and was able to connect using IPSec.
at least I know it is a firewall issue and not a client side issue.
now to see if I can get it to work using loopback interface.
04-28-2021 06:46 AM
Talked to PAN tech support and they weren't able to get ipsec to work with the loopback set up. still looking into it.
in the meantime, I have looked at various documents on setting up GP but none of them had info on any policies needed to allow traffic.
What traffic needs to be allowed? I don't want to anything that could lead to security issues if it is on the external interface.
Keep in mind, I created a security zone for VPN. not sure if that changes things.
02-14-2022 03:22 PM
Are you NATing your client IP? NAT is not supported to the IPSEC GlobalProtect Gateway.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!