IPv4 Processor receive cidr and output single address

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

IPv4 Processor receive cidr and output single address

L1 Bithead

Hi folks, 

 

Actually I can create a miner that pull an IPv4 list, send it to the processor and to the output. The output is always in that format:

 

1.1.1.1-1.1.1.1 (for an entry in the list with a single ip)

2.2.2.0-2.2.2.255 (for an entry with a subnet)

 

Is it possible to acheive this instead :

1.1.1.1

2.2.2.1

2.2.2.2

2.2.2.3

2.2.2.4 and so on...

 

Thanks!

2 REPLIES 2

L1 Bithead

Bumping this... did you ever figure out how to do it? I'd also like to either keep the format from the external feed list or output in CIDR format instead of a range. 

 

Found this that may help... works great for my needs.

 https://live.paloaltonetworks.com/t5/MineMeld-Articles/Parameters-for-the-output-feeds/ta-p/146170

L1 Bithead

I am not sure why the link above does not lead to the actual post, but I did find this. If you append ?tr=1 on the end of the URL for the range list, it will change the format to CIDR.

  • 3339 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!