External Dynamic List <list> is configured with no certificate profile.
Please select a certificate profile for performing server certificate validation.
Customer went from 7.1.x to now 8.0.x and is using a MineMeld link in the External Dynami List(EDL). This link is to a https site.
We followed this link:
After doing this, the warning was still there.
We had also done this:
So when we went to choose a certificate profle, there was not an option to choose one.
Because of this, we force the certificate profile via the CLI:
# set shared external-list Minemeld-Office-365-IP type ip certificate-profile <cert profile>
This resolved this issue. Then MineMeld went to update the list and there was an Auth error and the list emptied.
description contains 'EDL server certificate authentication failed. The associated external dynamic list has been removed, which might impact your policy. EDL Name: Minemeld-Office-365-IP, EDL Source URL: https://10.x.xxx.xx/feeds/office365_IPv4s, CN: norminemeld, Reason: SSL peer certificate or SSH remote key was not OK'
The customer then went back to Panorama and removed the cert profile.
We have also looked at this post:
Namely the second to the last comment by: PerTenggren
After further investigation it seems that EDL created as "shared" can't list any certificate profile, but it works if assigning the EDL to a specific device group.
Customer said that: All of our policies that reference the Minemeld external dynamic list are Shared (global) in nature and cannot see a local EDL.
Customer is wanting to not see this warning message after commits.
Solved! Go to Solution.
I also faced same issue. TAC has advised to try this.
As far as EDL warning is concerned, cert profile need to be configured to verify server certificate using CA that signed CA cert.
There are two ways to resolve warning
1) use http instead of https to connect to webserver in EDL config
2) Or, configure cert profile using root CA that signed web server cert, Global sign in this case and use it in cert profile under EDL.
Are you trying to push Certificates and profiles from Panorama to the FW's? If you have Device Group parent with policies defined and child DG's with firewalls, you will need to put a fake serial number in the parent DG and the same fake serial number in the template that you have the certificates in.
Make sure you have enough device licenses in Panorama to add this fake serial number. When you commit the changes to Panorama and then push the DG and Template changes to the firewall, you should see the certificate and profile in your firewalls to make your EDL's.
We also setup EDLs in the "shared" device-group and we're unable to attach a cert-profile to those EDLs. However, if we clone that EDL into a device-group leaf we get to chose a cert-profile.
It's not really an option for us to clone an EDL into each device-group. We also had to build individual security rules this way. So we keep the shared EDL for now, without any cert-profile attached.
(we're running v8.1.3 of Panorama)
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!