PA500 not being powered on for years refuses to boot...

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

PA500 not being powered on for years refuses to boot...

L3 Networker
Hi,
 
The other day I powered up our #PA500 which has been stoiwed away for some years.  I was able to do a factory reset by using CLI via the serial port
 
However unortunately it refuses to boot correctly, yelling about not being able to start or activate the data plane.
 
I have attached the CLI DMESG log and various screenshots from logfiles and status messages during boot.  
 
I would be VERY grateful if someone here could advise me where to look and/or what to remedy in order to track down the culprit and have the #PA500 box working again.
 
best regards from Norway
 
Tor Tveitane
0 REPLIES 0
  • 1119 Views
  • 0 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!