Unable to push tempalte to new firewall

I have setup a couple of new firewalls and I am unable to push the template from panorama. Also device group has not yet been pushed.

Should I deploy template or device group first?

See the errors below..

Panorama - Failed to update content with following message: encfilesize is 91736928

Hi Mates,

Our Panorama Pan OS is 10.0.12-h3 with older content update. While installing 10.1.12 PAN OS it is asking to update the content updates first.

While installing content update in Panorama gives below error.

• Failed to update content with foll

Cisco ACI-Plugin for Panorma: IP Subnet of BridgeDomain not being synced

Dear Guys

we have a Cisco ACI in place that polcy redirects all traffic to our Palo DC firewall.

For creating policies we rely on the Cisco ACI Plugin to sync endpoint information (IPs, Subnets, etc.) from ACI.

The issue: The "bridge domain" elemen

Errors after deploying template from Panorama

Hi all,

I am seeing the below errors after deploying templates to Palo's when attempting to commit HA configuration.

I have applied the HA IP so unsure why that is stating ip-address to be configured?

Also what is best way to resolve these dynamic

NGFW - Panorama registration 3978 : Traffic allowed but RST constantly.

Hi, 

I was trying to connect a new PA-440 spare device to our existing Panorama infrastructure, when i faced this weird issue as shown in the system logs. 

It's as if the TCP session starts and abruptly ends on port 3978 leading to a never ending

High Disk Space Usage on / root partition of Panorama

Hi All,

We are experiencing high disk space usage on the root partition of Panorama.

Critical alerts on Panorama is showing "Disk Usage for / exceeds limit, 100 percent in use, cleaning filesystem".

Output of "show system files" is as follows: 

Panorama fails to upgrade itself with error: Label sysroot1 does not indicate a valid image

Hi all,

      last time I tryed to upgrade my Panorama, I had this error: "Label sysroot1 does not indicate a valid image".

The panorama is working, also I'm able to upload images and content to managed firewall, only I cant upgrade itself.

Is not re

Need help with setup of new Palo Alto device

Need Palo Alto Tech support help on the phone - how to get to them?

Problem with viewing and downloading 30-day logs on Panorama server

In this case, Panorama is not displaying the logs report correctly. So, I suggested the following :

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClK8CAK

Then, I shared my action plan:

1. you could access the Panorama

Upgrading 10.1.11-h5 to 11.1.2 directly ?

We have acquired 14XX series firewall for one of our locations, currently running Panorama version is10.1.11-h5 (VM-mode -Microsoft Azure, VM-100, system mode-panorama).
This firewall 14xx is only compatible with 11. prior adding 14xx firewall, we mus

Panorama Removal

Hi All,

Our client is planning to remove panorama and manage their firewalls directly from PAFW GUI.

What would happen to policies push from panorama once removed? will it be retained on the FW?

What would happen for policies pushed for FW when

Panorama REST API policy creation error with ' 'message': 'Invalid Body',

{'code': 3, 'message': 'Invalid Body', 'details': [{'@type': 'CauseInfo', 'causes': [{'code': 9, 'module': 'pan_api', 'description': 'Invalid Body'}]}]}

 I m able to create policy with POST method  in panoram , however API doc for rela

Panorama Syslog SSL error while writing stream

Hi 

we encounter issue show as below:

Syslog  SSL error while writing stream; tls_error=\'SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure\'. location=\'/opt/pancfg/mgmt/syslogng/pan_sysng.cfg:68:3\

found in syslog-ng.log as below: