09-05-2019 08:18 AM
I'm facing issue where firewall and Panorama keeping disconnected every minute. It is getting connected and disconnecting.
This happens within a minute, I have checked the reachability is fine between panoraman and firewall and port is open.
I'm seeing in system logs TLS session disconnected not sure but again it is connecting.
PAN OS 8.1.8
M-100 series appliance
This happens will all my managed devices with Panorama, Also important I have some firewall in same network of Panorama which is also having issue.
Any help in this issue will be greatful
09-07-2019 05:52 AM
When did this problem start? Maybe at 1st of september? Do you habe more firewalls but it happens only with one device? Is the cpu load higher than normal on your panorama since this problem startet?
Just in case it is the problem I am aware of try to do a search query in the system logs where you display all logs starting from 08/01/2019 00:00:00 untill 08/31/2019 23:59:59. This query maybe won't show any results but if it is the same problem I had it will take - depending on the amount of logs you normally have per second - something between some minutes and a few hours and evrything will be normal again.
09-07-2019 10:46 PM
Problem is happening for last 2 months its not with only one firewall, all connected firewalls are disconnected and connecting again.
CPU load is normal not much high.
09-08-2019 06:24 AM
So did it may be start at 1st August?
If you did not already do so, I recommend to open also a TAC case (in addition to asking the community)
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!