Panorama log-collector

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.
Palo Alto Networks Approved
Palo Alto Networks Approved
Community Expert Verified
Community Expert Verified

Panorama log-collector

L2 Linker

We have two panorama and newly upgraded to 10.1.3.-h1 and HA and Panorama mode.

 

One log-collector group and two log-collectors .

All devices are have them in prefer-list

 

one of log-collectors has 0% avg log/sec . is it normal ?

 

 

JeffKim_0-1640199656569.png

 

 

 

 

1 accepted solution

Accepted Solutions

L2 Linker

It is not a bug ...

 

After restarting process at the passive panorama, it works.

debug software restart process vldmgr

 

Before we started process , we can see error log from vldmgr.log

 

View solution in original post

11 REPLIES 11

Cyber Elite
Cyber Elite

Thank you for the post @JeffKim

 

If log forwarding preference is set correctly, then this is not expected behavior.

Could you do basic verification from CLI to verify all services are running and status of elastic search:

 

show system software status
show log-collector-es-cluster health

show log-collector detail

 

I would also check on one of the Firewall that is supposed to send logs to log collector to confirm log forwarding preference list and logging status:

show log-collector preference-list

show logging-status

 

If none of the above does not reveal any obvious issue, I would try to restart service on Panorama: debug software restart process logd

 

Kind Regards

Pavel

 

Help the community: Like helpful comments and mark solutions.

Thanks Pavei

 

But when i run cli , I see hit log at secondary PN

kim3@esca-now-mgt-pan(primary-active)> show log-collector-es-cluster health

{
"cluster_name" : "__pan_cluster__",
"status" : "yellow",
"timed_out" : false,
"number_of_nodes" : 2,
"number_of_data_nodes" : 2,
"active_primary_shards" : 312,
"active_shards" : 604,
"relocating_shards" : 0,
"initializing_shards" : 0,
"unassigned_shards" : 20,
"delayed_unassigned_shards" : 0,
"number_of_pending_tasks" : 0,
"number_of_in_flight_fetch" : 0,
"task_max_waiting_in_queue_millis" : 0,
"active_shards_percent_as_number" : 96.7948717948718
}

 

jkim3@lvnv-now-mgt-pan(secondary-passive)> show log-collector-es-cluster health

{
"cluster_name" : "__pan_cluster__",
"status" : "yellow",
"timed_out" : false,
"number_of_nodes" : 2,
"number_of_data_nodes" : 2,
"active_primary_shards" : 312,
"active_shards" : 604,
"relocating_shards" : 0,
"initializing_shards" : 0,
"unassigned_shards" : 20,
"delayed_unassigned_shards" : 0,
"number_of_pending_tasks" : 0,
"number_of_in_flight_fetch" : 0,
"task_max_waiting_in_queue_millis" : 0,
"active_shards_percent_as_number" : 96.7948717948718
}

jkim3@lvnv-now-mgt-pan(secondary-passive)>

 

jkim3@esca-now-mgt-pan(primary-active)> debug log-collector log-collection-stats show incoming-logs | match traffic
traffic:1080653607
traffic generation logcount:1080653627 blkcount:260903 addition-rate:2330(per sec)
jkim3@esca-now-mgt-pan(primary-active)>

 

 

jkim3@lvnv-now-mgt-pan(secondary-passive)> debug log-collector log-collection-stats show incoming-logs | match traffic
traffic:285020348
traffic generation logcount:285020348 blkcount:67370 addition-rate:843(per sec)
jkim3@lvnv-now-mgt-pan(secondary-passive)>

 

At Pri PN or Sec PN , the status of disk ( Second PN Serial 00071000xxbb) is present/unavailable .

 

 

jkim3@lvnv-now-mgt-pan(secondary-passive)> show log-collector serial-number 00071000xxaa


SearchEngine status: Active
md5sum updated at 2021/12/23 07:16:00

Certificate Status:
Certificate subject Name: 0e070ba7-7aec-4663-ab53-7a2ea571fec6
Certificate expiry at: 2022/03/17 07:54:04
Connected at: 2021/12/17 17:35:30
Custom certificate Used: no
Raid disks
DiskPair A: Enabled, Status: Present/Available, Capacity: 1651 GB
DiskPair B: Enabled, Status: Present/Available, Capacity: 1651 GB
DiskPair C: Enabled, Status: Present/Available, Capacity: 1651 GB
DiskPair 😧 Disabled, Status: Not present/Unavailable, Capacity: 0 GB
DiskPair E: Disabled, Status: Not present/Unavailable, Capacity: 0 GB
DiskPair F: Disabled, Status: Not present/Unavailable, Capacity: 0 GB
DiskPair G: Disabled, Status: Not present/Unavailable, Capacity: 0 GB
DiskPair H: Disabled, Status: Not present/Unavailable, Capacity: 0 GB
DiskPair I: Disabled, Status: Not present/Unavailable, Capacity: 0 GB
DiskPair J: Disabled, Status: Not present/Unavailable, Capacity: 0 GB
DiskPair K: Disabled, Status: Not present/Unavailable, Capacity: 0 GB
DiskPair L: Disabled, Status: Not present/Unavailable, Capacity: 0 GB

Log collector stats
Incoming logs = 1658/sec
Incoming blocks = 8/min
Queries executed = 0/min
Reports generated = 0/min
detailed storage = 36 days
summary storage = 36 days
infra_audit storage = 36 days
platform storage = 0 days
external storage = 0 days
Last masterkey push status: Unknown
Last masterkey push timestamp: none

jkim3@lvnv-now-mgt-pan(secondary-passive)> show log-collector serial-number 00071000xxbb



Last commit-all: commit succeeded, current ring version 3
SearchEngine status: Active
md5sum updated at ?

Certificate Status:
Certificate subject Name:
Certificate expiry at: none
Connected at: none
Custom certificate Used: no
Raid disks
DiskPair A: Enabled, Status: Present/Unavailable, Capacity: 1651 GB
DiskPair B: Enabled, Status: Present/Unavailable, Capacity: 1651 GB
DiskPair C: Enabled, Status: Present/Unavailable, Capacity: 1651 GB
DiskPair 😧 Disabled, Status: Not present/Unavailable, Capacity: 0 GB
DiskPair E: Disabled, Status: Not present/Unavailable, Capacity: 0 GB
DiskPair F: Disabled, Status: Not present/Unavailable, Capacity: 0 GB
DiskPair G: Disabled, Status: Not present/Unavailable, Capacity: 0 GB
DiskPair H: Disabled, Status: Not present/Unavailable, Capacity: 0 GB
DiskPair I: Disabled, Status: Not present/Unavailable, Capacity: 0 GB
DiskPair J: Disabled, Status: Not present/Unavailable, Capacity: 0 GB
DiskPair K: Disabled, Status: Not present/Unavailable, Capacity: 0 GB
DiskPair L: Disabled, Status: Not present/Unavailable, Capacity: 0 GB

Log collector stats
Incoming logs = 0/sec
Incoming blocks = 0/min
Queries executed = 0/min
Reports generated = 0/min
detailed storage = 0 days
summary storage = 0 days
infra_audit storage = 0 days
platform storage = 0 days
external storage = 0 days
Last masterkey push status: Unknown
Last masterkey push timestamp: none

Cyber Elite
Cyber Elite

Thank you for reply and sorry for late response @JeffKim

 

Since based on CLI output you provided, the status of ElasticSearch is not red and based on debug of log collector there are logs coming there seems to be no reason the logs should not appear under secondary log collector. At this point, I would generate tech-support file from log collector and open a TAC ticket.

 

Kind Regards

Pavel

Help the community: Like helpful comments and mark solutions.

Thanks Paveik,

 

The issue is preference-list and we have one list and all FW send log to active log-collector in preference list.

 

We need to create new preference-list and 2nd log-collector first and pri log-collector is 2nd .

 

And then we need to assign Firewall devices in 1st preference and 2nd preference for load sharing

 

Web GUI looks bug on code 10.1.3-h1

 

L2 Linker

It is not a bug ...

 

After restarting process at the passive panorama, it works.

debug software restart process vldmgr

 

Before we started process , we can see error log from vldmgr.log

 

Cyber Elite
Cyber Elite

Thank you for sharing resolution @JeffKim

 

Would it be possible to share what errors you have seen in the vldmgr.log?

 

Thank you in advance

Pavel

Help the community: Like helpful comments and mark solutions.

We got error as below.

 

 

2022-01-04 11:27:24.878 -0800 connection failed for err 111 with vld-0-0. Will start retry 32 in 2000
2022-01-04 11:27:24.878 -0800 connection failed for err 111 with vld-1-0. Will start retry 32 in 2000
2022-01-04 11:27:24.878 -0800 connection failed for err 111 with vld-2-0. Will start retry 32 in 2000
2022-01-04 11:27:25.457 -0800 Error: _pkt_process(pkt.c:1486): vld for segnum 45 not set or not connected. dropping pkt
2022-01-04 11:27:25.457 -0800 Error: _handle_read_event(pkt.c:3543): Error processing read pkt on fd:16 cs:logd for vldmgr:vldmgr
2022-01-04 11:27:25.457 -0800 Error: vldmgr_pkt_process(pkt.c:3638): Error handling read event on fd:16 for vldmgr:vldmgr
2022-01-04 11:27:25.457 -0800 Error: _process_fd_event(pan_vld_mgr.c:2282): Error processing the request from 16 on vld: vldmgr
2022-01-04 11:27:26.878 -0800 Connection to vld-0-0 established
2022-01-04 11:27:26.878 -0800 Connection to vld-1-0 established
2022-01-04 11:27:26.878 -0800 Connection to vld-2-0 established

Thank you for sharing!

Help the community: Like helpful comments and mark solutions.

L2 Linker

Assuming these are m600 LCs -

 

You'll want to upgrade to 10.1.4. Output from 'show system environmentals' is broken. It does not show fan RPMs nor does it show the power supplies are inserted.

  • 1 accepted solution
  • 12735 Views
  • 11 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!