Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

Sending monitoring information from firewall to Panorama

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Sending monitoring information from firewall to Panorama

L1 Bithead

Hi,

 

We have migrated our legacy firewall settings which was working without Panorama to a new firewall which is working with Panorama.

On Panorama the information which should appear under Monitor is not there.

I researched a bit and understood that in order to show session logs in Panorama, Monitor tab, I need to configure for every security rule to send logs to Panorama.

We have a few thousand security rules. Is there a global setting to allow it by default or a process which will set it for all?

 

Thanks,

Yevgeny

1 accepted solution

Accepted Solutions
2 REPLIES 2

L6 Presenter

L1 Bithead

Thank you!

  • 1 accepted solution
  • 1581 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!