B2B VPN IKEv2 Fail with Amazon Private Cloud Peer

Setting up a VPN with a vendor. It came up the first time and test data was passed. It was a couple of weeks after testing before the tunnel would actually be used. When that time came we could not get the tunnel up. IKEv2 fails. I know nothing chang

Need Help on Configuring GlobalProtect VPN

Hello there,

I am working on setting up GlobalProtect VPN for our organization and could use some advice. We have a mixed environment with Windows, macOS, and Linux machines, and we're looking to ensure a seamless experience for our users.

Specif

Cloud Identity Engine - Failed to get client configuration

Migrating from on-prem (radius/ldap) auth & group mapping to CIE using AAD for both directory and auth types.GP porta connection fails with "Failed to get client configuration".

Things we've checked...

* CIE Auth Type configured to use the 'name' S

FW Outbound policy

Hi

What is the best practice policy outbound from the FW itself (i.e management )?

Allow any out? *.palotalto.com?

Failed to initiate Plugin Phase1 commit

Anyone seen this before?

"Failed to initiate Plugin Phase1 commit"

Process logrcvr stopped (pid: -1) - Exit Signal: SIGSEGV

"debug software restart process log-receiver" did not fix it nor did a reboot.

GlobalProtect initiating network trace capturing using the Netsh tool in Windows .

Good day

I'm experiencing an issue where I'm receiving influx of alerts related to this netsh tool.

I got this arlticle and I was wondering if you can assist me in finding the cause of this behaviour.

https://www.reddit.com/r/paloaltonetworks/comme

Errors after deploying template from Panorama

Hi all,

I am seeing the below errors after deploying templates to Palo's when attempting to commit HA configuration.

I have applied the HA IP so unsure why that is stating ip-address to be configured?

Also what is best way to resolve these dynamic

XSOAR - GET-GPO DisplayName

Hi,

I've created a playbook to analyze some alerts related to SOC and GPO, but the alerts come with ObjectGUID and I need to convert the GUID to DisplayName.

In PowerShell, the command is simple: (Get-GPO -Guid "$GUID").DisplayName.

I tried running

Detect and Restrict Powershell cmdlets

Hello everyone,

I would like to know if any of you have struggled with support and technical cases with the need I show below.

I would like to know what you can tell me or give me your opinion about taking action against powershell cmdlets.

After sev

BIOC API access

Hello Folks,

In the Cortex API documentation there is not mention of how to make BIOC rules using APIs or how to access them.

I was wondering if anyone has been able to use the API to create BIOC rules.

Creating a ServiceNow incident by taking the Slack user responses

Hi All,

We have a requirement to create a ServiceNow ticket by taking the slack user responses.

I have built a playbook which does send the SlackBlockBuilder to the specified Slack channel but the playbook runs only when an incident is attached to it

Creating a ServiceNow incident by taking the Slack user responses

Hi All,

We have a requirement to create a ServiceNow ticket by taking the slack user responses.

I have built a playbook which does send the SlackBlockBuilder to the specified Slack channel but the playbook runs only when an incident is attached to it

IOT security is identifying devices in a wrong way

Hello , we are doing a poc for IOT security license , the IOT cloud service is identifying 85% of devices correctly , the rest of these devices are identified in a wrong and unacceptable way . For example the same device sometimes is identified as wi